Snmp-request, Snmp-trap | HP TippingPoint Next Generation Firewall

snmp-request

The snmp-request command is used to manage the SNMP (Simple Network Management Protocol) request agent. When enabled, the SMS agent responds to the SNMP system request. This command prompts you to enable the SNMP request agent and enter the following information:

Enter the SNMP version: V[2], V[3], or [B]oth <2,3,[B]>:

Enter community		string []:
Enter User Name		[]:
Enter Auth	Protocol (None, MD5, or SHA): []:
Enter Auth	Key:	********************************
Confirm Key:		********************************

Enter Privacy Protocol (None, AES-128, AES-192, AES-256, DES or Triple_DES): []:

Enter Priv Key: ********************************

Confirm Key: ********************************

Version: Both

Community String:

User Name:

Auth Protocol:

Privacy Protocol:

Usage

snmp-request

snmp-trap

The snmp-trap command is used to manage the SNMP (Simple Network Management Protocol) traps. The SMS sends SNMP traps to NMS destinations. This command prompts you to enable configuration for an NMS trap destination and enter the following information:

Commands: [A]dd [D]elete [V]ersion [C]ommunity [P]ort [E]ngine [U]ser Au[T]hProto Auth[K]ey P[R]ivProto Pr[I]vKey [L]ist [?]help [Q]uit

Command? <A,D,V,C,P,E,U,T,K,R,I,[L],?,Q>: a

Add=> Enter trap destination address []: 192.168.1.1

Add=> Enter SNMP version: v[2] or v[3] <2,3>: 3

Add=> Enter port number [162]:

Add=> Enter Engine ID []:

Add=> Enter User Name []:

Enter Auth Protocol (None, MD5, or SHA): []:

Enter Auth Key: ********************************

Add=> Confirm Key: ********************************

Enter Privacy Protocol (None, AES-128, AES-192, AES-256, DES or Triple_DES): []:

Enter Priv Key: ********************************

Add=> Confirm Key: ********************************

IP Address: 192.168.1.1

Version: v3

Port: 162

Engine ID:

User Name:

Auth Protocol:

Privacy Protocol:

Usage

snmp-trap

Security Management System CLI Reference 15