Pwd

Collection of password-related attribs. The attribs are used to confirm the SuperUser password and enable the service mode used by support personnel. For information about managing users including user groups, passwords, and security levels, see the “Administration” chapter in the SMS User Guide.

Related Command users

Table 3-14 pwd Attributes

Attribute	Description	Type	Access	Range

pwd.group-adduser	Used to add a user to a user group.	String	write-only

pwd.group-deluser	Used to remove a user from a user group.	String	write-only

pwd.group-list	Used to list all groups, or groups with	String	read-only
	users.

pwd.level	Attribute used to set the security level for	Int	read-write
	the password.

pwd.service-enable	Used to enable/disable the service mode	Bool	read-write	0
	password for the system.
	To protect customer security, the service
	mode is deactivated at the factory. To
	enable the service mode account, the
	customer must log in with an account that
	has SuperUser rights and set this attrib to
	yes. After service mode is enabled, a
	service professional can log in to the
	system with a secret one-time password.
	To disable service mode, set the attrib to
	no.
	To clear this value, use a period (.).
	Example:
	set pwd.service-enable=false

pwd.user-add	Used to add a user and specify the user’s	String	write-only
	default user group. User names must
	comply with the rules defined by
	pwd.level. You must also specify a user
	group in the form of
	?usergroup=username.
	Example:
	set pwd.user-add?superuser=
	johnsmith

pwd.user-age	Attribute used to set the maximum age for	Int	read-write
	a password.

pwd.user-del	Used to delete a user.	String	write-only

pwd.user-desc	Attribute used to describe the user	String	read-write
	account.

pwd.user-email	Attribute used for the user account email	Email	read-write
	address.

Security Management System CLI Reference 35