HP TippingPoint Next Generation Firewall manual net Attributes Description Type Access Range

Table 3-11 net Attributes

Attribute	Description	Type	Access	Range
net.ipaddr6	Attribute used to view and change the IPv6	IPaddr	read-write	0
	address. To clear this value, use a period
	(.). Applies only the net object.
	The network interface must be restarted
	(net.restart) for setting to take effect. When
	you employ this command, the CLI may not
	reflect the change with a confirmation
	message. See ”Example” on page 30.
	NOTE: The IP address uses IPv6 notation.
net.mask	Attribute used to provide the subnet mask	IPaddr	read-write	0
	value. To clear this value, use a period (.).
net.mtu	Attribute used to view the MTU (Maximum	Bool	read-only	0
	Transmission Unit) for the SMS Ethernet
	10/100/1000 interface.
net.ready	Returns "true" if the primary network	Bool	read-only	0
	interface is configured and ready.
net.restart	Attribute used restart the	Bool	write-only	0
	Ethernet10/100/1000 interface with the
	current network settings. Set to true to
	restart immediately. (false has no effect.)
	Warning: restarting the network interface
	may cause connections to be lost, including
	SMS client sessions, and remote CLI
	sessions. Applies only the net object.
net.scope-link	Attribute used to return the IPv6 Scope Link	String	read-only	0
	address for the
	Ethernet 10/100/1000 interface. See ”net”
	on page 30 and the associated net.ipaddr6
	attribute).
	See also ”ifconfig” on page 8 and
	”ipconfig” on page 8.
net.autoneg	Attribute used to view, and enable/disable	Bool	read-write	0
	auto-negotiation for the Ethernet
	10/100/1000 interface.
	Valid values are: yes or no.

ntp

Collection of NTP (Network Time Protocol) settings used to synchronize the system time with a remote time server. NTP allows machines within a network to be synchronized on a common time.

Related Objects

svc, snmp

32 SMS Attributes and Objects