High availability

Collection of system High Availability (HA) attribs. The attribs are used to retrieve HA information. Table 3-6 HA Attributes

Attribute	Description		Type	Access	Range

ha.status	Attribute returning the status of HA.		String	read-only
	The status messages include the following:
	• Disabled: High Availability is not
		configured.
	•	Enabled.
	• Error: The system could not determine
		local status.
	• Error: Unable to communicate with peer.
	• Error: Peer system state is invalid.
	• Error: Configuration out of sync with peer.
	• Error: Peer system failure.
	•	Configured: Synchronization required.
	•	Configured: Attempting synchronization.
	•	Configured: Synchronizing.
	• Degraded: Peer takeover pending.
	• Degraded: Unable to communicate with
		peer.
	•	Degraded: Synchronization required.
	• Degraded: Peer system failure.

ha.disable	Attribute that disables HA.		String	write-only	1-1024

ha.configured	Attribute returning the status of the HA			read-only
	configuration.

ha.ports-enabled	Attribute returning the status of the HA ports.		String	read-write
	By default, HA ports are open. To disable, use
	set ha.ports-enable = no.
	NOTE: If any of your SMS devices are
	currently configured for HA, the HA ports on
	those systems cannot be disabled. If the HA
	ports are disabled, that SMS can not be used
	in an HA configuration.

ha.cluster-info	Attribute returning the detailed status for the			read-only
	Passive and Active systems in the SMS HA
	cluster.

Security Management System CLI Reference 25