Sterling SDAA 25-100 specifications Shipping Information

Page 2

Shipping Information

Unpacking and Inspection

You should inspect your dryer for possible shipping damage.

Thoroughly check the equipment for any damage that might have occurred in transit, such as broken or loose wiring and components, loose hardware and mounting screws, etc.

In the Event of Shipping Damage

According to the contract terms and conditions of the Carrier, the responsibility of the Shipper ends at the time and place of shipment.

Notify the transportation company’s local agent if you discover damage.

Hold the damaged goods and packing material for the examining agent’s inspection. Do not

return any goods before the transportation company’s inspection and authorization.

File a claim with the transportation company. Substantiate the claim by referring to the agent’s report. A certified copy of our invoice is available upon request. The original Bill of Lading is attached to our original invoice. If the shipment was prepaid, write us for a receipted transportation bill.

Advise customer service regarding your wish for assistance and to obtain an RMA (return material authorization) number.

If the Shipment is Not Complete

Check the packing list as back-ordered items are noted on it. You should have:

;Dehumidifying Dryer

;Bill of lading

;Packing list

;Operating and Installation packet

;Electrical schematic and panel layout drawings

;Component instruction manuals

Re-inspect the container and packing material to see if you missed any smaller items during unpacking.

If the Shipment is Not Correct

If the shipment is not what you ordered, contact the shipping department immediately. For shipments in the United States and Canada, call 1 (800) 233-4819; for all other countries, call our international desk at (630) 475-7491. Have the order number and item number available. Hold the items until you receive shipping instructions.

Returns

Do not return any damaged or incorrect items until you receive shipping instructions from the shipping department.

Image 2

Contents Sdaa 25-100 15-60 cfm Dehumidifying Dryers Shipping Information Table of Contents Maintenance Service Department Sales Department Contract Department Safety Symbols Used in this Manual SafetyHow to Use This Manual Wear Safety Glasses and Work Gloves Responsibility General ResponsibilityOperator Responsibility RememberMaintenance Responsibility Reporting a Safety DefectDehumidifying Dryers Safety General Description Functional DescriptionModels Covered in This Manual Mechanical Features Standard FeaturesWhat is desiccant? Electrical FeaturesOptions Safety Devices and InterlocksController Features Fail Safe Operation Safety Circuit StandardsSafety Device Lock-Outs Rigging and Placing the Dryer InstallationUncrating the Equipment Machine-Mount Dryer Dimensions Floor-Mount Dryer Dimensions Suggested Lift Rigging for Cart Mounted Dryers Recommended Dryer Lifting HardwareElectrical Connections Suggested Lift Rigging for Machine Mounted DryersChecking for Proper Blower Rotation Setup ProceduresThree-Phase Models Making Dryer/Drying Hopper Process Air ConnectionsOptional Aftercooler Installing Water Lines Hose and Hose ClampDrying Hopper Air Trap Considerations Pre-Startup Checks Auto-Tuning the DryerInitial Start-up Starting Up the DryerShutting Down the Dryer Operation Start-upController Description and Operation SwitchesIndicator Lights Lit when Control Output 2 is on. Not used Process Air Temperature ControllerLit when Control Output 1 is on. The Out1 Identifying Temperature Controller Keys Indicator Name DescriptionLights in the Operation Indicator Section when Setting the Process Air TemperatureE5CN Operating Parameters Adjustment Level Indicator Name Description Tuned prior to dryer startupEntering Operating Parameters to Select Modes ON, OFFOptional Setting the High Dew Point AlarmProcess Air Dew Point Display Watlow Operating Parameters Redundant Safety Controller DisplaySetting the Redundant Safety Controller Mode Parameter Setting range Default Manf. setting Dryer Operation Procedures Model Heating Cooling 15 cfm 30 cfm 60 cfm Page Controller Operation With Optional Alarm Horn & Reset Button Page Alarm Display Messages Auto-Tuning the Dryer Shutting Down the DryerPhotocopy this page for your maintenance records MaintenancePreventative Maintenance Schedule Servicing Process Air Filters Preventative MaintenanceRecommendations for Cleaning and Replacing Filters VacuumingCleaning with Compressed Air Servicing the Dew Point MonitorCorrective Maintenance Symptoms of Worn DesiccantFirst AID Replacing Worn DesiccantConsult local disposal regulations for more information Procedures Replacing the Process HeaterIntroduction TroubleshootingProblem Possible cause Corrective action Problem Possible cause Corrective action Check resin manufacturer’s data Using a Platinum Resistance Thermometer Determining Temperature Controller Errors or Sensor ErrorsUsing a Thermocouple Warranty Restrictions WarrantyWarranty Specifications AppendixCustomer Responsibilities Warranty LiabilitiesOptional Components Technical Specifications Annex B InformationDrawings and Diagrams Spare Parts List Aftercooler Design SpecificationsLevel 2 & 3 Spare Parts List Electrical & Mechanical Dryer Safety Tags Safety Tag InformationWarranty Returns Returned Material PolicyDryer Identification Serial Number Tag Located on back of DryerParts Department Service DepartmentTechnical Assistance Sales Department