4.If necessary, while holding the center of the cover, carefully insert the flat-blade screwdriver under the right side of the display assembly hinge, gently pry up, and then lift the cover out. This procedure might need to be repeated on the left side of display assembly hinge to completely remove the cover.
Screw, M2.5×4mm (2)
Figure 2-7. Removing the Keyboard Cover
Reassembly Note
•Insert the tabs on the left- and right-center of the panel into the mating slots under the keyboard, and then press the panel into place.
HP Omnibook XE4100/XE4500 | Removal and Replacement 2-11 |
