2.Connect the laptop or PC 10/100Mb Ethernet port configured for DHCP addressing to the available
3.Open a web browser on the PC and enter the active Onboard Administrator module Service IP address found in the Enclosure Info screen in step 2.
4.Log into the Onboard Administrator. For more information on using Onboard Administrator, see the HP BladeSystem Onboard Administrator User Guide.
Cabling the network to the enclosure
Cable the interconnect modules to the enclosure. See "Mapping to interconnect ports (on page 48)" and the supporting documentation that came with your interconnect modules for specific details on cabling the interconnect modules.
Powering up the enclosure
Setting up AC power for the enclosure varies depending on whether you have a
Single-phase AC configuration
•
Cabling and powering up the enclosure 59