HP Doll c7000 manual Measuring with the rack template, Installing the rack rails

Page 25

2.Use the rack template ("Measuring with the rack template" on page 25) to mark the locations for the rack rails.

3.Install the rack rails ("Installing the rack rails" on page 25) for each enclosure.

4.Install the enclosure into the rack ("Installing the enclosure into the rack" on page 26).

Measuring with the rack template

The rack template ships with the rack rail kit and provides detailed instructions on where to position the enclosure rack rails and where to install the four cage or clip nuts. Each enclosure kit includes the rack rails recommended for that enclosure.

NOTE: Four cage nuts and four clip nuts are included with the enclosure. Cage nuts should be used in racks with square holes. Clip nuts should be used in racks with round holes.

When installing multiple enclosures, install the rack rails and cage or clip nuts for one enclosure, and then install the enclosure. Repeat for each additional enclosure.

Installing the rack rails

The rack rails are marked for easy identification. The left rack rail is marked "L" and the right rack rail is marked "R."

To install the rack rails:

1.Begin with the left rack rail. Align the end of the rail with the rear rack column.

2.Slide the rack rail closed until the end of the rail is locked in place, wrapping behind the rear rack column.

Installation 25

Image 25
Contents HP BladeSystem c7000 Enclosure Setup and Installation Guide Page Contents Support and other resources Contents Verifying the pallet contents Planning the installationRack requirements Rack-free environment requirements Planning the installation Space and airflow requirements Power requirements Temperature requirementsGrounding requirements Enclosure front components Component and LED identificationPower supply bay numbering Power supply LEDs Device bay numbering HP BladeSystem Insight Display components Location Discovery ServicesEnclosure rear components Fan bay numbering Fan LED Onboard Administrator componentsUID LED HP c7000 Onboard Administrator with KVM componentsVGA Interconnect bay numberingInstallation overview InstallationDisassembling the enclosure Installation Installation Rack installation Rack-free installationMeasuring with the rack template Installing the rack railsInstalling the enclosure into the rack Installation Installing the rear cage into the enclosure Installing a power supply Component installationInstallation Installing a full-height blade Installing bladesInstallation Installation Removing a device bay shelf Creating a full-height device bay blank Installation Installing a half-height blade Installation Installation Accessing a server blade with local KVM Accessing local media devices USB diskette drive Description Installing fansInstallation Installing Onboard Administrator modules Installation Installing interconnect modules Installation Mapping to interconnect ports Mapping half-height blades Mapping full-height blades Mapping BL2x220c Blades Mapping the BL680c G7 Blade Bay-to-bay crosslinks Device bay crosslinks Removing interconnect bay dividers Onboard Administrator cabling Cabling and powering up the enclosureCabling the enclosure Enclosure link cabling Connector DescriptionCabling a PC to the enclosure service port Single-phase AC configuration Powering up the enclosureCabling the network to the enclosure Cabling and powering up the enclosure Page PDU installation Cabling and powering up the enclosure Three-phase AC configuration HP BladeSystem Insight Display Running the Insight Display installation stepsInsight Display overview HP BladeSystem Insight Display HP BladeSystem Insight Display HP BladeSystem Insight Display Navigating the Insight Display Health Summary screen HP BladeSystem Insight Display HP BladeSystem Insight Display Enclosure Info screen Enclosure Settings screenBlade and Port Info screen Turn Enclosure UID On/Off screen HP BladeSystem Insight Display View User Note screen Chat Mode screenTroubleshooting resources TroubleshootingImportant safety information Symbols on equipmentTroubleshooting Power errors Insight Display errorsLocation errors Cooling errorsConfiguration errors Device failure errorsTroubleshooting Before you contact HP Support and other resourcesHP contact information Customer Self RepairRéparation par le client CSR Riparazione da parte del cliente Reparaciones del propio cliente Reparo feito pelo cliente Support and other resources Support and other resources Support and other resources Regulatory compliance identification numbers Regulatory compliance noticesFederal Communications Commission notice Cables ModificationsCanadian notice Avis Canadien European Union regulatory notice Japanese notice Bsmi notice Korean notice Chinese notice Battery replacement noticeLaser compliance Power cord statement for Japan Taiwan battery recycling noticePreventing electrostatic discharge Electrostatic dischargeGrounding methods to prevent electrostatic discharge Acronyms and abbreviations USB Documentation feedback Index HP BladeSystem Insight Display errors Static electricity