![](/images/new-backgrounds/1212764/21276477x1.webp)
Setting up online destinations in the camera
You can specify up to 34 custom destinations (such as individual Photosmart Express Menu.
1.Verify that your computer is connected to the Internet.
2.While in the Photosmart Express Menu, use
to highlight
Share, then press
. If you have already created destinations, highlight Share Menu Setup and press
again.
3.Connect the camera to your computer. Follow the
4. Turn off the camera and disconnect the camera from the computer. Turn on the camera, access the
![](/images/new-backgrounds/1212764/21276477xi12.webp)
![](/images/new-backgrounds/1212764/21276477xi13.webp)
Photosmart Express Menu, then highlight
Share and press
to verify that the new destinations are now in the camera.
Sending images to online destinations
After you have set up online destinations in the camera, you can mark images to be sent to these custom destinations the next time you connect your camera to your computer.
1.While in the Photosmart Express Menu, use
to highlight
Share, then press
.
2.In the Share menu, highlight an option, then press
.
•Custom .
•All in the menu, then highlight each destination to which you want to send the pictures with the tag you selected, pressing
to select each destination. After selecting
destinations, press . This option is available only if you have tagged at least one image (see “Tagging images” on page 24).
•All
you want to send all images, pressing to select each destination. After selecting destinations, press
. This option is available only if you have more than one image in the camera.
3.To mark additional images to share, use to display an image, then repeat Step 2.
4.When you are done marking images to share, press repeatedly until you return to
Playback.
5.To send the images to the destinations, see “Transferring images with HP Photosmart Software” on page 31.
Sharing images | 37 |