
Chapter 3
To select a shooting mode, press Mode while in 
 Picture Capture, use ![]()
 to highlight a shooting mode, then press 
. To exit without changing the shooting mode,
press 
.
or
Auto Mode 
Steady Photo (R830 series 
conditions (see “Optimizing exposure” on page 13). To use ![]()
![]()
 Steady Photo with R840 series cameras, see Steady Photo under “Using the Picture Capture and Video Record menus” on page 17.
Night 
 NOTE: The shooting modes do not apply when you are recording video clips.
The shooting mode remains in effect until it is changed again, or until you turn off the camera.
Using Panorama mode
The 
/
 Panorama mode allows you to take a sequence of 2 to 5 pictures that can be stitched together to capture a scene too wide to fit into a single picture. To stitch your
panoramic sequence together, use 
 Stitch Panorama on the camera (see “Stitching panoramas” on page 25). If you installed the HP Photosmart Software (see “Install the
16 Setting options for taking pictures and recording video clips