York DY 060, DY 048 warranty Vertical Ducted Inlet

								343615-YTG-B-0308
TABLE 6: DY036 INDOOR SOUND POWER LEVELS (VERTICAL DUCTED INLET)
	UNIT DESCRIPTION / MODEL				DY036 / 3 Ton
	CONFIGURATION				Vertical Ducted Inlet
	Indoor Blower Speed (RPM)	632		632		881		883
	Blower Static Pressure (IWG)	0.2		0.3		0.2		0.7
	Airflow (CFM)	1069		870		1903		917
	Blower Motor BHP	0.36		0.33		0.71		0.49
		ID Blower	Cooling	ID Blower	Cooling	ID Blower	Cooling	ID Blower	Cooling
	Octave Center Freq.		Operation2		Operation2		Operation2		Operation2
		Only (dB)	(dB)	Only (dB)	(dB)	Only (dB)	(dB)	Only (dB)	(dB)
	63	78	82	78	82	80	85	80	84
	125	70	75	70	74	71	80	71	79
	250	55	60	55	60	59	61	58	62
	500	47	50	47	50	52	53	49	52
	1000	40	43	39	43	50	51	45	46
	2000	37	40	37	39	45	46	41	43
	4000	36	37	36	37	45	46	40	40
	8000	44	44	44	44	45	47	44	44

1.Tested in accordance with ARI Standard 260. Refer to 2001 Standard for Sound Rating of Ducted Air Moving and Conditioning Equipment .

2.Cooling Operation – ID blower, compressor and outdoor fan operating.

3.Test Duct Dimension: 12 in. wide x 18 in. high x 8 ft. long (0.30m x 0.46m x 2.44m).

4.Test duct termination is flush with reverberation room wall.

5.Duct end (sound reflection) correction: (11, 6, 3, 1, 0, 0, 0, 0) dB at (63, 125, 250, 500, 1k, 4k, 8k) Hz.

TABLE 7: DY036 INDOOR SOUND POWER LEVELS (VERTICAL DUCTED DISCHARGE)

UNIT DESCRIPTION / MODEL				DY036 / 3 Ton
CONFIGURATION			Vertical Ducted Discharge
Indoor Blower Speed (RPM)	632		632		881		883
Blower Static Pressure (IWG)	0.2		0.3		0.2		0.7
Airflow (CFM)	1069		870		1903		917
Blower Motor BHP	0.36		0.33		0.71		0.49
	ID Blower	Cooling	ID Blower	Cooling	ID Blower	Cooling	ID Blower	Cooling
Octave Center Freq.		Operation2		Operation2		Operation2		Operation2
	Only (dB)	(dB)	Only (dB)	(dB)	Only (dB)	(dB)	Only (dB)	(dB)
63	80	83	80	83	83	86	82	85
125	78	79	77	78	80	83	79	82
250	55	60	54	59	63	63	58	62
500	48	51	46	50	58	59	52	53
1000	41	44	39	43	54	55	48	49
2000	37	40	35	38	50	50	42	44
4000	38	39	36	37	52	53	44	44
8000	44	45	44	44	49	50	45	45

1.Tested in accordance with ARI Standard 260. Refer to 2001 Standard for Sound Rating of Ducted Air Moving and Conditioning Equipment .

2.Cooling Operation – ID blower, compressor and outdoor fan operating.

3.Test Duct Dimension: 12 in. wide x 18 in. high x 8 ft. long (0.30m x 0.46m x 2.44m).

4.Test duct termination is flush with reverberation room wall.

5.Duct end (sound reflection) correction: (11, 6, 3, 1, 0, 0, 0, 0) dB at (63, 125, 250, 500, 1k, 4k, 8k) Hz.

10 Johnson Controls Unitary Products