HP 6000 Router manual Software Maintenance Overview, Boot Menu

Page 37

4

SOFTWARE MAINTENANCE

Software

Maintenance

Overview

Boot Menu

There are three types offiles managed by the Router:

■Boot ROM program files

■Application program files

■Configuration files

The maintenance of the Router involves mainly the three aforementioned types of files. Only the software maintenance functions listed in Boot menu, for example upgrading of application files, are discussed here.

Boot main menu and Boot sub-menu will be used during the maintenance of the router software. Boot sub-menu can upgrade and start a program. While Boot main menu upgrades and starts an application program.

Build up a configuration environment and then boot the Router.

1Enter <N> and the following information will be displayed on the terminal screen:

Press CTRL+A to Stop AutoBoot!

Starting...

2Press <Ctrl+A> in five seconds after “Starting...” pops up, then the system enters Boot sub-menu.

In order to access the Boot sub-menu, you shall press <Ctrl+A> within five seconds after the information “starting…” appears. Otherwise the system will directly enter Boot main menu if no error is found in system checks.

If you do not press <Ctrl+A> as required, then the system will check the code for Boot main system when Boot sub-system starts.

Image 37

Contents Router 6000 Family Installation Guide Campus Drive 3Com CorporationMarlborough, MA 01752-3064Contents Register Your Product to Gain Service Benefits Troubleshooting Application Software UpgradeConventions About this GuideCommunication protocols that are used to interconnect WANs List conventions that are used throughout this guideDocumentation RelatedRouter Use the display user-interfaceIntroducing the Router Family Main features of 6000 RoutersIntroduction Abundant fault isolation methods Structure Router ModelComponents Front PanelRear Panel of the 3Com Router Rear PanelFront Panel Rear Panel of the 3Com Router System Description of 6040 System description6040 6080 SdramIntroduction to Provides the hardware reset button, ResetGeneral Modules 6000 Routers modules include RPU, PSU PWR, FAN, and FICsConsole interface attributes Interface Console interfaceLED and button Description Attribute DescriptionEthernet interface AUX interfaceAUX interface attributes MDILED LEDs Front Panel of AC Power Module PWR LED descriptionFan Location Temperature/Humidity requirements in the equipment room Installing the RouterLimitation on dust content in equipment room General SiteEven the entire Router Check Router Accessories Safety Recommendations3Com 6000 Routers and accessorie Name QuantitySET Installation Tools Meters Equipment6000 Router dimensions InstallationModel Dimensions mm Various FICs Installing ModulesAC power input range 100 to 240V, 50/60Hz AC Connect AC Power Cord AC power supplyCable-retention clip Power switch AC input Recommended AC power socketConnect console cable Console cableAUX cable Console failure, AUX can function as a console interfaceInstalling the Router Configuration Configuring the RouterEstablishing EnvironmentConfiguring the Router Establishing Configuration Environment Configuring the Router Startup Process Self-test on Sdram Select booting device and download applicationsDisplay system information Following information displays on the screenProcedure Router Configuration FundamentalsDecompress Application Initialize the systemSnmp Management Performs the local configuration through CON portSlot 5 Slot 7Slot 8 Slot Interface numbering rule SlotSoftware Maintenance Overview Software MaintenanceBoot Menu Upgrading Boot main system LargeBootrom through serial port Boot Sub-menuStarting Boot main system Modifying serial port parametersStarting application program from Flash Starting host program in default modeEntering serial port sub-menu Entering Ethernet port sub-menu Available Boot Device wancomDisplaying available boot files in the Flash Then the system enters boot file control menuModifying Flash description area Setting the backup boot file Setting the main boot fileAvailable boot files Returning to Boot main menuIgnoring system configuration Upgrading Program Files Using Xmodem ProtocolRebooting the system ProgramXmodem File Setting ParametersUpgrading Building up upgrade environmentApplication Program Via Ethernet PortConfiguring the Router Software Maintenance Power Module Hardware MaintenanceHardware RemovalFan Removal Install a FanRight side inside the integrated chassis Remove a FanInstall an RPU RPU Removal InstallationRemove an RPU Hardware Maintenance Troubleshooting Power System TroubleshootingTroubleshooting Configuration SystemTroubleshooting Troubleshooting Application Software UpgradeUpgrade device of 6000 Router Displays the following promptTroubleshooting Application Software Upgrade Troubleshooting FIC Categories Flexible Interface CardsFollowing are the FICs available for 6000 Series Routers 3C13861 Port 10/100 FICEthernet Cable Make Ethernet cablePort 100 FX MM FIC 1-port 100BASE-F SM FIC interface attributes SC optical fiber connectorFIC 3C13863 Port Enhanced SerialFIC 3C13864 24 RS232 DTE 24 RS232 DCE 35 DTE 35 DCE 21 DTE 21 DCE Port FICAttribute Description Synchronous Asychronous DTE, DCEService Terminal accessFront panel of 8-port FIC is shown as follows DDN leased lineInterface Attributes Port Channelized FIC Connecting the Interface CablePort Fractional FIC E1 FIC LEDs on the Card Panel Following table describes the LEDs on the card panelsData is being transceived 120-ohm 4E1 adapter cable Interface cables Internal DIP SwitchPort Channelized T1/PRI FIC Port Fractional T1 FICPort Channelized T1/PRI FIC panel Interface attributes of FICcardsMain functions of 1-port Channelized E3 FIC include Port Channelized E3 FIC 3C13888Interface Attributes Port Channelized E3 FIC Interface attributesConnect Interface Cable Port Channelized T3 1CT3 3C13889Main functions of 1-port Channelized T3 FIC include Port T3 interface attributes Following table describes the LEDs on the card panelLED description of 1-port T3 FIC CT3Port OC ATM Attribute Port OC-3 ATM SML Following figure illustrates the 1-port OC-3 ATM SM panelSonet OC-3/SDHPots FIC 3C13872 Port Adsl overFollowing figure illustrates the 1-port OC-3 ATM SML panel LED description of the ATM cardsAttribute Port Adsl FIC Port Adsl FIC interface attributesFIC-1ADSL Pstnm LED description 2-port Adsl FICFlexible Interface Cards Obtaining Support for Your Product Telephone Technical Contact UsSupport and Repair US and Canada Telephone Technical Support and Repair Latin America Telephone Technical Support and RepairAppendix a Obtaining Support for Your Product