HP manual Safety Recommendations, Check Router Accessories, 3Com 6000 Routers and accessorie

Page 21

Safety Recommendations

21

■Add a lightning arrester for power supply onto the front end of the power input in order to protect the power supply from lightning strikes in a more effective way.

■Add a special lightning protection facility at the input end of the signal cables in order to protect the signal cables led to the outdoors, such as ISDN cable, telephone cable, and E1/T1 cable, from lightning strikes in a more effective way.

Check Workbench Following are the rules that you should observe when installing the Router:

■Leave enough clearance at the air intake vents and air exhausting vents to ensure adequate ventilation of the router chassis.

■Make sure that the workbench has a good ventilation system.

■Make sure that the workbench is stable enough and can support the weight of the Router and the installation accessories.

■Make sure that the workbench is well-grounded.

Safety Recommendations

Check Router and

Accessories

When installing or working on a Router, you should:

■Keep the Router far away from heat sources and water/liquid.

■Make sure that the Router has been correctly grounded.

■Wear ESD-preventive wrist strap during installation and maintenance.

■Connecting the cables to the ports appropriate to them. Above all, do not insert the telephone cable (including the ISDN cable) into a serial port.

■Follow laser cautions. Do not directly stare into the the laser, or the fiber connector connected to it.

■Use Uninterrupted Power Supply (UPS).

After having confirmed that the installation conditions comply with the requirements, please open the packing cases of the Router.s

Table 4 3Com 6000 Routers and accessorie

Item

Name

Quantity

Note

 

 

 

 

1

6040/6080

1 set

Router chassis

 

router

 

 

2

Main control

1 PCS

-

 

unit

 

 

3

PSU (AC)

1/2 PCS

To achieve redundancy, you must

 

 

 

equip two PSUs.

4

Fan

1

-

5

FIC

0~2/4/8

You can equip the 6040 with four

 

 

 

FICs, and 6080 with eight

 

 

 

maximum. You must specify FIC

 

 

 

type and quantity when placing an

 

 

 

order.

6

PGND wire

1 PCS

-

7

Console cable

1 PCS

-

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Router 6000 Family Installation Guide Campus Drive 3Com CorporationMarlborough, MA 01752-3064Contents Register Your Product to Gain Service Benefits Troubleshooting Application Software UpgradeConventions About this GuideCommunication protocols that are used to interconnect WANs List conventions that are used throughout this guideDocumentation RelatedRouter Use the display user-interfaceMain features of 6000 Routers Introducing the Router FamilyIntroduction Abundant fault isolation methods Structure Router ModelComponents Front PanelRear Panel of the 3Com Router Rear PanelFront Panel Rear Panel of the 3Com Router System Description of 6040 System description6040 6080 SdramIntroduction to Provides the hardware reset button, ResetGeneral Modules 6000 Routers modules include RPU, PSU PWR, FAN, and FICsConsole interface attributes Interface Console interfaceLED and button Description Attribute DescriptionEthernet interface AUX interfaceAUX interface attributes MDILED LEDs Front Panel of AC Power Module PWR LED descriptionFan Location Temperature/Humidity requirements in the equipment room Installing the RouterLimitation on dust content in equipment room General SiteEven the entire Router Check Router Accessories Safety Recommendations3Com 6000 Routers and accessorie Name QuantitySET Installation Tools Meters EquipmentInstallation 6000 Router dimensionsModel Dimensions mm Various FICs Installing ModulesAC power input range 100 to 240V, 50/60Hz AC Connect AC Power Cord AC power supplyCable-retention clip Power switch AC input Recommended AC power socketConnect console cable Console cableAUX cable Console failure, AUX can function as a console interfaceInstalling the Router Configuration Configuring the RouterEstablishing EnvironmentConfiguring the Router Establishing Configuration Environment Configuring the Router Startup Process Self-test on Sdram Select booting device and download applicationsDisplay system information Following information displays on the screenProcedure Router Configuration FundamentalsDecompress Application Initialize the systemSnmp Management Performs the local configuration through CON portSlot 5 Slot 7Slot 8 Slot Interface numbering rule SlotSoftware Maintenance Software Maintenance OverviewBoot Menu Upgrading Boot main system LargeBootrom through serial port Boot Sub-menuStarting Boot main system Modifying serial port parametersStarting application program from Flash Starting host program in default modeEntering serial port sub-menu Entering Ethernet port sub-menu Available Boot Device wancomThen the system enters boot file control menu Displaying available boot files in the FlashModifying Flash description area Setting the backup boot file Setting the main boot fileAvailable boot files Returning to Boot main menuIgnoring system configuration Upgrading Program Files Using Xmodem ProtocolRebooting the system ProgramXmodem File Setting ParametersUpgrading Building up upgrade environmentApplication Program Via Ethernet PortConfiguring the Router Software Maintenance Power Module Hardware MaintenanceHardware RemovalFan Removal Install a FanRight side inside the integrated chassis Remove a FanRPU Removal Installation Install an RPURemove an RPU Hardware Maintenance Troubleshooting Power System TroubleshootingTroubleshooting Configuration SystemTroubleshooting Troubleshooting Application Software UpgradeUpgrade device of 6000 Router Displays the following promptTroubleshooting Application Software Upgrade Troubleshooting Flexible Interface Cards FIC CategoriesFollowing are the FICs available for 6000 Series Routers 3C13861 Port 10/100 FICEthernet Cable Make Ethernet cablePort 100 FX MM FIC 1-port 100BASE-F SM FIC interface attributes SC optical fiber connectorPort Enhanced Serial FIC 3C13863FIC 3C13864 24 RS232 DTE 24 RS232 DCE 35 DTE 35 DCE 21 DTE 21 DCE Port FICAttribute Description Synchronous Asychronous DTE, DCEService Terminal accessFront panel of 8-port FIC is shown as follows DDN leased lineConnecting the Interface Cable Interface Attributes Port Channelized FICPort Fractional FIC E1 FIC Following table describes the LEDs on the card panels LEDs on the Card PanelData is being transceived 120-ohm 4E1 adapter cable Interface cables Internal DIP SwitchPort Channelized T1/PRI FIC Port Fractional T1 FICPort Channelized T1/PRI FIC panel Interface attributes of FICcardsMain functions of 1-port Channelized E3 FIC include Port Channelized E3 FIC 3C13888Interface Attributes Port Channelized E3 FIC Interface attributesPort Channelized T3 1CT3 3C13889 Connect Interface CableMain functions of 1-port Channelized T3 FIC include Port T3 interface attributes Following table describes the LEDs on the card panelLED description of 1-port T3 FIC CT3Port OC ATM Attribute Port OC-3 ATM SML Following figure illustrates the 1-port OC-3 ATM SM panelSonet OC-3/SDHPots FIC 3C13872 Port Adsl overFollowing figure illustrates the 1-port OC-3 ATM SML panel LED description of the ATM cardsPort Adsl FIC interface attributes Attribute Port Adsl FICFIC-1ADSL Pstnm LED description 2-port Adsl FICFlexible Interface Cards Obtaining Support for Your Product Contact Us Telephone TechnicalSupport and Repair US and Canada Telephone Technical Support and Repair Latin America Telephone Technical Support and RepairAppendix a Obtaining Support for Your Product
Top Page Image Contents