Chapter 6
Set the redial options
If the device was unable to send a fax because the receiving fax machine did not answer or was busy, the device attempts to redial based on the settings for the busy- redial and
•Busy redial: If this option is turned on, the device redials automatically if it receives a busy signal. The
•No answer redial: If this option is turned on, the device redials automatically if the receiving fax machine does not answer. The
To set the redial options
1.Press Setup.
2.Press right arrow 
to select Fax Settings, and then press OK.
3.Press right arrow 
to select Redial Options, and then press OK.
4.Press right arrow 
to select the appropriate Busy Redial or No Answer Redial options, and then press OK.
Set the fax speed
You can set the fax speed used to communicate between your device and other fax machines when sending and receiving faxes. The default fax speed is Fast.
If you use one of the following, setting the fax speed to a slower speed might be required:
•An Internet phone service
•A PBX system
•Fax over Internet Protocol (FoIP)
•An integrated services digital network (ISDN) service
If you experience problems sending and receiving faxes, you might want to try setting the Fax Speed setting to Medium or Slow. The following table provides the available fax speed settings.
Fax speed setting | Fax speed | |
Fast | v.34 | (33600 baud) |
Medium | v.17 | (14400 baud) |
Slow | v.29 | (9600 baud) |
|
|
|
To set the fax speed from the device control panel
1.Press Setup.
2.Press right arrow 
to select Fax Settings, and then press OK.
3.Press right arrow 
to select Fax Speed, and then press OK.
4.Select an option using the arrow keys, and then press OK.
58 Fax