•If you have a computer
•If you have an answering machine on the same phone line with the device, you might have one of the following problems:
ƕYour answering machine might not be set up properly with the device.
ƕYour outgoing message might be too long or too loud to allow the device to detect fax tones, and the sending fax machine might disconnect.
ƕYour answering machine might not have enough quiet time after your outgoing message to allow the device to detect fax tones. This problem is most common with digital answering machines.
The following actions might help solve these problems:
ƕWhen you have an answering machine on the same phone line you use for fax calls, try connecting the answering machine directly to the device as described in Case I: Shared voice/fax line with answering machine.
ƕMake sure the device is set to receive faxes automatically. For information on setting up the device to receive faxes automatically, see Receive a fax.
ƕMake sure the Rings to Answer setting is set to a greater number of rings than the answering machine. For more information, see Set the number of rings before answering.
ƕDisconnect the answering machine and then try receiving a fax. If faxing is successful without the answering machine, the answering machine might be causing the problem.
ƕReconnect the answering machine and record your outgoing message again. Record a message that is approximately 10 seconds in duration. Speak slowly and at a low volume when recording your message. Leave at least 5 seconds of silence at the end of the voice message. There should be no background noise when recording this silent time. Try to receive a fax again.
NOTE: Some digital answering machines might not retain the recorded silence at the end of your outgoing message. Play back your outgoing message to check.
Solve fax problems | 139 |