![](/images/new-backgrounds/1212950/212950299x1.webp)
Clean the paper path
During the printing process, paper, toner, and dust particles can accumulate inside the product. Over time, this buildup can cause
Specks | Smearing | |
|
|
|
|
|
|
Clean the paper path from the product control panel
1.Press the Setup button.
2.Use the arrow buttons to select the Service menu, and then press the OK button.
3.Use the arrow buttons to select the Cleaning Page item, and then press the OK button.
4.Load plain letter or A4 paper when you are prompted.
5.Press the OK button again to confirm and begin the cleaning process.
A page feeds through the product slowly. Discard the page when the process is completed.
Clean the exterior
Use a soft, damp,
Product updates
Software and firmware updates and installation instructions for this product are available at www.hp.com/support/LJColorMFPM175. Click Downloads and drivers, click the operating system, and then select the download for the product.
136 Chapter 12 Manage and maintain the product | ENWW |