HP F2200 manual Solution 4 Check to see if the product is in ink-backup mode

Page 104

For more information, see:

•Recommended papers for printing and copying

•Information on paper

Cause: The wrong kind of paper was loaded in the input tray.

If this did not solve the issue, try the next solution.

Solution 4: Check to see if the product is in ink-backup mode

Solution: Check to see if the the product is printing in ink-backup mode, with only one print cartridge installed.

If the product is in ink-backup mode, text and photo quality will differ from those printed when using both print cartridges.

If you are satisfied with the print quality, continue printing in ink-backup mode. Or, replace the missing print cartridge.

For more information, see:

•Use ink-backup mode

•Replace the print cartridges

Cause: A print cartridge was missing and the product was printing in ink-backup mode.

If this did not solve the issue, try the next solution.

Solution 5: Check the print settings

Solution: Check the print settings.

•Check the print settings to see if the color settings are incorrect.

For example, check to see if the document is set to print in grayscale. Or, check to see if advanced color settings such as saturation, brightness, or color tone, are set to modify the appearance of colors.

•Check the print quality setting and make sure it matches the type of paper loaded in the product.

You might need to choose a lower print quality setting, if colors are running into each other. Or, choose a higher setting if you are printing a high-quality photo, and then make sure photo paper such as HP Premium Photo Papers, is loaded in the input tray.

NOTE: On some computer screens, colors might appear differently than they do when printed on paper. In this case, there is nothing wrong with the product, print settings, or print cartridges. No further troubleshooting is required.

For more information, see:

•Change the print speed or quality

•Choose papers for printing and copying

Cause: The print settings were set incorrectly.

Troubleshooting

Print quality troubleshooting

101

Image 104

Contents HP Deskjet F2200 All-in-One series Windows Help HP Deskjet F2200 All-in-One series Page Contents Maintain the HP All-in-One Use the copy featuresUse the scan features Contents TroubleshootingHP warranty and support Technical informationIndex Contents HP Deskjet F2200 All-in- One series Help Chapter HP All-in-One overview HP All-in-One at a glanceCopy ScanControl panel buttons LabelControl panel buttons Status light overview Light statusUse the HP Photosmart software HP All-in-One overview Setup Guide Find more informationChapter How do I? How do I? To enable printer sharing on a Windows computer Connection informationSupported connection types Use printer sharingConnection information Load originals and load paper Load originalsChoose papers for printing and copying To load an original on the glassRecommended papers for printing and copying Recommended papers for printing only Papers to avoidAdditional papers to avoid when copying Load paperLoad full-size paper Papers to avoid for all print and copy jobsTo load full-size paper Load 10 x 15 cm 4 x 6 inch photo paper Related topics Load index cardsTo load photo paper in the input tray Load envelopes To load index cards in the input trayHP Iron-On Transfers for printing only Load other types of paperTo load envelopes Related topics To print from a software application Print from your computerPrint from a software application Make the HP All-in-One the default printer Change the print settings for the current jobSet the paper size To set the paper sizeTo set the paper type for printing View the print resolutionSet the paper type for printing To view the print resolution Change the print speed or qualityChange the page orientation To select a print speed or qualityScale the document size Preview your print jobTo scale the document size To preview your print jobChange the default print settings To change the default print settingsPrinting shortcuts Create printing shortcutsPerform special print jobs Delete printing shortcutsTo create a printing shortcut Click the Printing Shortcuts tabPrint a borderless image To print a borderless imagePrint a photo on photo paper To print a photo on photo paperPrint using Maximum dpi Off applies no HP Real Life Technologies to the imageTo print on both sides To print in Maximum dpi modePrint on both sides 11 9 Print a multiple-page document as a bookletTo print a multiple-page document as a booklet Left-edge binding for left-to-right languages Print multiple pages on a single sheet To print multiple pages on a single sheetPrint a multiple-page document in reverse order To print a multiple-page document in reverse orderReverse an image for iron-on transfers Print on transparenciesTo reverse an image for iron-on transfers To print on transparenciesPrint a group of addresses on labels or envelopes To print a group of addresses on labels or envelopesExpand Document Options, and then expand Printer Features Print a posterPrint a Web To print a posterStop a print job Resume a print job To stop a print job from the computer Windows 2000 usersTo resume a print job from the control panel To resume a print job from the computer Windows Vista usersTo resume a print job from the computer Windows 2000 users Set the copy paper type Use the copy featuresMake a copy Change copy speed Press Start Copy Black or Start Copy ColorMake multiple copies of the same original To make a Fast copyCopy a two-page black-and-white document Make a 10 x 15 cm 4 x 6 inch borderless copy of a photoTo copy a two-page document from the control panel Press Start Copy BlackStop copying To make a borderless copy of a photo from the control panelPress Start Copy Color To stop copyingRelated topics Use the scan features Scan an originalScan Edit a scanned preview image Edit a scanned imageEdit a scanned document To scan to a computerStop scanning To stop scanningClean the HP All-in-One Clean the exteriorClean the glass To clean the glassClean the lid backing To clean the lid backingTo print a self-test report Print a self-test reportWork with print cartridges Handle the print cartridges Check the estimated ink levels Replace the print cartridgesTo check the ink levels from the HP Photosmart Software Printer Toolbox appears Click the Estimated Ink Level tabChoose the right cartridge combination To replace the print cartridgesMaintain the HP All-in-One Maintain the HP All-in-One Use ink-backup mode Ink-backup mode outputExit ink-backup mode Use a photo print cartridgePrint cartridge protector Store the print cartridgesPrint cartridge storage and handling Align the print cartridges Clean the print cartridges To align newly installed print cartridgesClean the print cartridge contacts To clean the print cartridge contacts Clean the area around the ink nozzles To clean the area around the ink nozzles Clean the print cartridges Remove ink from your skin and clothing RemedyShop for ink supplies To order print cartridges from your desktopShop for ink supplies Troubleshooting Hardware setup troubleshootingTroubleshooting common setup issues View the Readme fileProduct will not turn on Solution 1 Make sure the power cord is connectedSolution Solution 2 Press the On button more slowly After setting up the product, it does not print Software installation troubleshooting To start the installation from a Windows computer Minimum System Checks screen appearsRed X appears on the USB connect prompt To retry the USB connectionReceived a message that an Unknown Error has occurred Some of the buttons are missing in the HP Solution CenterUninstall and reinstall the software Registration screen does not appearTo uninstall from a Windows computer Clear paper jams To clear a paper jam from the rear access doorPaper jams Print cartridge troubleshooting Information on paperInformation on print cartridges To troubleshoot the print cartridges Resolving print cartridge problemsResolving print cartridge error messages Solution 1 Remove and reinstall the print cartridges To verify and install the correct print cartridgesSolution 2 Clean the print cartridge contacts Solution 3 Print in ink-backup modePrint quality troubleshooting To troubleshoot print quality issuesSolution 1 HP recommends using genuine HP print cartridges Wrong, inaccurate, or bleeding colorsSolution 2 Check the paper loaded in the input tray Solution 3 Check the paper typeSolution 4 Check to see if the product is in ink-backup mode Solution 5 Check the print settingsInk is not filling the text or graphics completely Solution 6 Clean the print cartridgesSolution 2 Check the print settings Solution 4 Clean the print cartridges Solution 1 Check the paper type Solution 2 Check the print quality settingPrintouts have horizontal streaks or lines Solution 3 Rotate the imageSolution 1 Make sure the paper is loaded correctly Solution 4 Clean the print cartridge nozzles Solution 5 Clean the print cartridgesPrintouts are faded or have dull colors For more information, seeSolution 1 Check the print settings Solution 2 Check the paper typeSolution 4 Clean the glass Printouts seem blurry or fuzzySolution 2 Check the resolution of the image Printouts have vertical streaksSolution 2 Make sure only one type of paper is loaded Solution 3 Check the rear access doorSolution 1 Print on a page of plain paper Printouts are slanted or skewedText edges are jagged Solution 2 Wait while the ink driesPaper is not picked up from the input tray Print troubleshooting Solution 1 Reload the envelopes in the input traySolution 2 Load a different type of envelope Envelopes print incorrectlySolution 1 Print from the HP Photosmart Software Solution 2 Use the appropriate mediaBorderless printing produces unexpected results Product is not respondingSolution 1 Wait for the product to finish other tasks Solution 2 Check for a paper jamSolution 3 Load more paper in the input tray Solution 4 Check for a print carriage stallSolution 7 Restart the product Solution 5 Check the cable connections to the productSolution 6 Make sure that the product is turned on Solution 8 Check the print driver status Solution 9 Check the print queue for canceled jobsSolution 1 Restart the product and your computer Product prints meaningless charactersNothing happens when I try to print Solution 2 Try printing another documentSolution 1 Make sure that the product is turned on Solution 2 Wait for the product to finish other tasksSolution 4 Check the cable connections to the product Solution 5 Load more paper in the input traySolution 6 Check for a paper jam Solution 7 Check for a print carriage stallMargins are not printing as expected Pages in my document came out in the wrong orderSolution 3 Check the paper guide position To check your margin settingsSolution 2 Make sure that the paper size setting is correct Solution 1 Check the margins in your software application Text or graphics are cut off at the edgeSolution 3 Remove and reload the paper in the input tray Solution 1 Check the ink levels in the print cartridgesBlank page came out while printing To preview the print layoutSolution 2 Check for blank pages at the end of the document Solution 4 Check the print cartridges for protective tapeCopy troubleshooting Nothing happens when I try to copy Solution 3 Wait for the product to finish other tasksParts of the original do not appear or are cut off Solution 5 Check for a paper jamSolution 1 Place the original correctly on the glass Printout appears enlarged on Solution 2 Clean the scanner glassPrintout is blank Solution 2 Check the ink levels in the print cartridges Solution 1 Resize the imageSolution 2 Use photo paper Borderless copy has white space around the edgesScan troubleshooting Solution 1 Make sure your computer is turned onScan fails Scan haltsSolution 5 Make sure you have sufficient computer memory Scanned image is blank Scanned image is incorrectly croppedScanned image has incorrect page layout Text format is incorrectScanned image shows dotted lines instead of text To adjust the brightnessText is incorrect or missing Errors Flashing lightsOn light Paper Light Product messages Mechanism error Solution 1 Check for a paper jamDoor open Firmware revision mismatchMemory is full Solution 2 Make sure the print carriage is not blockedScan errors Solution 1 Uninstall and reinstall the software Solution 2 Refresh the Windows Device Manager To refresh the Windows Device ManagerSolution 3 Check the Digital Imaging Monitor Solution 4 Check the status of the productCause The Digital Imaging Monitor was not running To check the status of the productSolution 5 Check the power supply To check the power supplySolution 6 Check the USB cable connection To check the USB connectionSolution 7 Scan with Windows Image Acquisition WIA To scan using WIASolution 8 Disable the Lexbces service Computer Management screen appears To restart the serviceOn the General tab, in the Service status area, click Start Solution 11 Check the USB chipset and controller Solution 9 Run the Scan Diagnostic utilitySolution 10 Install a patch To check the USB chipset and controller Power connection Power cord and adaptor To uninstall the software and reset the product More information about using a USB hubSolution 12 Uninstall the software and reset the product To uninstall the software completely Click the check box next to Do not show this message again To run the Disk Cleanup utilityMore information about the Disk Cleanup utility Unable to print To install the softwareSolution 1 Print a self-test report Solution 2 Clear the print queue Solution 3 Disconnect and reconnect the USB cableTo clear the print queue To disconnect and reconnect the USB cableSolution 4 Verify the driver configuration To verify that the product is set as the default printerTo check if the printer is paused or offline Solution 5 Check if the printer is paused or offlineTo verify the print driver Solution 6 Clear the print queue manually Solution 7 Restart the print spoolerTo clear the print queue manually To stop and restart the print spoolerSolution 8 Check the software application Product might not be correctly installedSolution 1 Reset the product To verify the software applicationSolution 2 Check the power cord and USB cable To check the USB connection Solution 3 Restart the computer Solution 4 Uninstall and reinstall the productProduct was not found Solution 2 Check the power cord and USB cable To check the USB connection Solution 3 Restart the computer Solution 1 Restart the computer Product could not find available scan destinationsTo uninstall and reinstall the software To uninstall and reinstall the software Error occurred while communicating with the product To check the USB connection Solution 3 Restart the computer Solution 6 Contact HP support for service Error reading or writing the file File messagesFile not found File format not supportedGeneral user messages Paper messages No scan optionsOut of disk space Cannot load paper from input traySolution 1 Replace the rear door of the product Solution 2 Check the paper type and the print settingsOut of paper To check the paper in the input trayTo set the paper size Solution 3 Clean the rollers Letter or A4 Appropriate listed envelope sizeTo clean the rollers Solution 4 Contact HP supportPower and connection messages Paper jam or misfeedPaper mismatch Wrong paper widthCommunication test failed Solution 1 Make sure the product is turned onHP All-in-One not found Improper shutdown Two-way communication lostPrint cartridge messages Original HP ink has been depleted Non-HP cartridges installedPreviously used genuine HP cartridges installed Printing in ink-backup mode Low on inkPrint carriage is stalled Solution 2 Clear the print carriage To clear the print carriageIf the print carriage is stuck on the right side If the print carriage is stuck on the left sideTo check for a paper jam in the rear access door Solution 3 Check the power source Need alignment or alignment failed Solution 5 Print cartridge or sensor might be defective Solution 3 Check if print cartridges are fully insertedSolution 4 Align newly installed print cartridges Print cartridges missing or not detected Solution 1 Remove and reinsert the print cartridgesTo make sure the print cartridges are installed correctly Solution Clean the print cartridge contacts To clean the print cartridge contacts Copper-colored contacts Ink nozzles do not clean Solution 3 Replace the print cartridges Incompatible print cartridgesSolution 2 Contact HP customer support Print cartridges in wrong slotTroubleshooting Print cartridge problem To determine which print cartridge is having the problemSolution 1 Remove and reinsert the print cartridges To make sure the print cartridges are installed correctly Solution 2 Clean the print cartridge contacts Copper-colored contacts Ink nozzles do not clean Solution 3 Replace the print cartridges Troubleshooting HP warranty and support WarrantyBefore you call HP customer support Phone support periodPlacing a call After the phone support periodHP Korea customer support Prepare the product for shipment HP warranty and support Specifications Technical informationEnvironmental product stewardship program Material safety data sheets Paper usePlastics Recycling programΑπόρριψη άχρηστων συσκευών στην Ευρωπαϊκή Ένωση Regulatory notices FCC statementToxic and hazardous substance table HP Deskjet F2200 All-in-One series declaration of conformity Technical information Symbols/Numerics IndexIndex 221 222

Related manuals

Manual 32 pages 25.67 Kb