Troubleshooting
Chapter 12
Solution 4: Clean the glass
Solution: Clean the glass and lid backing.
For more information, see:
•Clean the lid backing
•Clean the glass
Cause: Debris might be stuck on the glass or on the back of the document lid; this causes poor copy quality and slows down processing.
If this did not solve the issue, try the next solution.
Solution 5: Clean the print cartridges
Solution: Check the estimated ink levels remaining in the print cartridges.
NOTE: Ink level warnings and indicators provide estimates for planning purposes only. When you receive a
If there is ink remaining in the print cartridges, but you are still noticing a problem, print a
For more information, see:
•Print cartridge troubleshooting
•Print a
Cause: The print cartridges needed to be cleaned or there was insufficient ink.
Printouts seem blurry or fuzzy
Try the following solutions if your printout is smudged or unclear.
NOTE: There is no problem with the ink supplies and replacing the print cartridges is unnecessary.
TIP: After reviewing the solutions in this section, you can go to HP's support Web site to see if there is additional troubleshooting help. For more information, go to: www.hp.com/support.
•Solution 1: Check the print settings
•Solution 2: Check the resolution of the image
108 Troubleshooting