Lochinvar Harmony System Startup, Startup Sequence, Selecting The Sensor Type, Default - F, down

Self Test...

Test Passed

Initializing...

Lochinvar

Harmony v X.XX

Initialization

Please wait...

INITIALIZING

PERMANENT STORAGE

AREA

Please wait...

-- SYSTEM STARTUP --

SELECT

to continue

SYSTEM STARTUP

STARTUP SEQUENCE

•The series of initialization screens appears on the left. The Harmony will automatically step through the screens.

•When powered, the Harmony performs a self test on its compo- nents.

•After the self test diagnostics have been successfully completed, the Harmony will initialize the panel.

•On the first powerup, the System Startup screen will appear after the initialization is complete. If it doesn't, the Harmony has already been configured. To check the configuration, or to make changes, follow the procedure on pg. 28 to bring up the System Startup screens.

•The System Startup menu determines the sensors, the type of output, the operating mode, and the modulating mode.

•Press the ADJUST/SELECT knob once to begin setting up the panel.

SYSTEM STARTUP

--- SENSOR TYPE ---

>°F

°C

--- SENSOR TYPE ---

°F

>°C

--- SENSOR TYPE ---

°F

>°C

--- SENSOR TYPE ---

°F

°C

Reset °F

Reset °C

ADJUST	Press to
	select
PRESS TO SELECT	°F
ADJUST	or turn
	to scroll
PRESS TO SELECT	down
ADJUST	Press to
	select
PRESS TO SELECT	new

All Sensor

Type options

SELECTING THE SENSOR TYPE

Check the installation and which sensor was installed

Temperature Set Point Mode Default - °F

•The same temperature sensor can display either in °F or °C.

•If °F is selected, all temperatures and settings will be displayed in degrees Fahrenheit.

•If °C is selected, all temperatures and settings will be displayed in degrees Celsius.

Reset Mode (Reset °F or Reset °C)

•Reset mode is only available if an outdoor sensor is connected to terminals A11 and A12. DO NOT select Reset °F or Reset °C without an outdoor sensor.

•The same outdoor sensor can display either in °F or °C.

•If Reset °F is selected, all temperatures and settings will be dis- played in degrees Fahrenheit.

•If Reset °C is selected, all temperatures and settings will be dis- played in degrees Celsius.

•For information on how to configure the Reset, see pg. 25.

11