Teka ieka MWL 20 BIT manual Programming the microwave

EN

Programming the microwave

The normal functions (microwave, grill, microwave + grill, defrosting by weight and defrosting by time) may be programmed one after each other, up to a maximum of 3 functions.

For example, to defrost 800 g. of meat, cook it for 10 minutes at power 4 of the microwave function and then for 8 minutes at power 3 of the microwave+ grill, proceed as follows:

1.Press the DEFROST button. The function button goes green.

2.The type of food Meat (Type 1) is already enabled.

3.Use the “-“ and “+” buttons to indicate the weight of the food (0.8 kg).

4.Press the CLOCK/PROGRAMME button and select the next function.

5. Press the MICROWAVE button. The function button goes green.

6.Use the “-“ and “+”buttons to indicate the desired cooking time (10 min).

7.Press the “-“ button to select the microwave at power 4.

8. Press the CLOCK/PROGRAMME button and select the following programme.

9. Press the MICROWAVE + GRILL button. The function key goes green.

35

10. Use the “-“ and “+”buttons to indicate the desired cooking time (8 min).

11. Press the “-“ button twice, to set the microwave to power 3.

12.Press the start button. The microwave starts to function.

13.The appliance beeps when it goes from one function (defrosting) to another (microwave or grill).

14. When the microwave beeps, open the door and turn the food around. Close the door again and press the start button.