Notice Couteau "Prepline" EO:Mise en page 1 15/09/08 14:23
Page 4
Description
GB
1ON/OFF switch
2Light
3Knife ejection button
4 Motor unit
5 Knife protection
6 Pair of standard knives
7 Knife rivet
8 Pairs of frozen food knives (*according to model)
Use
1.Take the two knives by their non-cutting ends.
Hook the two knives together by sliding the rivet of one of them into the opening of the other (fig. 1). The protections must be outside the knives.
2.With the appliance unplugged, introduce the ends of the knives fully (cutting edge downwards) into the motor unit (4) while pinching the protections (5) (fig. 2). Once in place, release pressure to allow the knives to clip into place. When this happens, you will hear a slight click.
3.To slice with standard knives (fig. 3):
Plug in the appliance. The light (2) will come on. Start by pressing switch (1). Place the knives on the food to be sliced and press down (fig. 3).
4.To slice with frozen products (fig. 4) (according to model):
Plug in the appliance. The light (2) will come on. Start by pressing switch (1). Place the knives on the food to be sliced and draw backwards and forwards to ease cutting.
Do not use the appliance continuously for more than 10 minutes. Unplug the appliance before removing the knives. Please keep children away from the appliance and the knives.
5.To disassemble the knives, UNPLUG the appliance; press the knife ejection button (3), take the knives, pinching the protections (5) and pull to remove them from the motor unit (fig. 5).
Cleaning
•Slide the knives to separate them.
•Wash with soapy water, rinse and wipe before storing them in their plastic sheaths.
•Knives can be washed in the dishwasher.
4