GE AEH24, AEV24, AEQ24 Storm Window Requirements, Remove The Air Conditioner From The Case

Window Installation Instructions

1WINDOW REQUIREMENTS

•These instructions are for a standard double-hung window. You will need to modify them for other types of windows.

•The air conditioner can be installed without the accordion panels if needed to fit in a narrow window. See the window opening dimensions.

•All supporting parts must be secured to firm wood, masonry or metal.

•The electrical outlet must be within reach of the power cord.

18″ min.

30″ to 41″

(With accordion panels)

261⁄2″ min.

(Without accordion panels)

2STORM WINDOW REQUIREMENTS

A storm window frame will not allow the air conditioner to tilt toward the outside, and will keep it from draining properly.

To adjust for this, attach a piece of wood to the stool.

WOOD PIECES–

WIDTH: 2″

LENGTH: Long enough to fit inside the window frame.

THICKNESS: To determine the thickness, place a piece of wood on the stool to make it 1/2″ higher than the top of the storm window frame or the vinyl frame.

Attach securely with nails or screws provided by the installer.

	1/2″ higher
	than vinyl frame
	(on some windows)
1/2″ higher	Wood
than storm
window	Stool
frame
Storm window	Vinyl frame
frame
	11

3REMOVE THE AIR CONDITIONER FROM THE CASE

ARemove the locking screw and locking bracket from the lower frame. Save to reinstall later.

BRemove the ground screw and save to reinstall later.

Remove the ground screw and save to reinstall later

CSlide the air conditioner from the case by gripping the base pan handle and pulling forward while bracing the case.

4PREPARE THE WINDOW

Cut the window sash seal to the proper length. Peel off the backing and attach the seal to the underside of the window sash.