Window Installation Instructions
8INSTALL THE AIR CONDITIONER IN THE CASE
AMake sure the ground wire is off to the side
and slide the air conditioner into the case. Do not push on the controls or the finned coils. Make sure the air conditioner is firmly seated.
BReinstall the locking bracket and screw removed earlier.
CReconnect the ground wire to the air conditioner using the screw removed earlier.
IMPORTANT: The ground wire must be reinstalled to ensure a proper ground.
DRemove the front grille from its box and remove the shipping tape.
EGrasp the inlet grille at the bottom corners and pull it forward. Unhook it from its top hinges and set it aside.
FUsing the tab, pull up slightly on the filter to release it and pull it down and out.
14
8INSTALL THE AIR CONDITIONER IN THE CASE (cont.)
GPull the coiled power cord from its shipped position in the air discharge area. Attach the front grille frame to the case by inserting the tabs on the grille frame into the slots on the front top of the case.
Guide the lever carefully through the grille frame as you push it in.
HPress the grille frame in around the power cord on the right side. Secure the grille with a type F (painted) screw on each side and a type C screw in the front.
Type F screw
Type F screw
Type C screw
IReinstall the filter.
JReinstall the inlet grille. Connect power.
Caulk or