GE AEQ12, AEQ10 Cool Mode, Energy Saver Mode, Fan Only Mode, Auto Fan Speed, Remote Control

Page 5

Cool Mode

Use the Cool mode at Low, Med, High or Auto Fan Speed for cooling. Use the Temperature Increase

/Decrease pads to set the desired temperature between 64°F and 86°F in 1°F increments.

An electronic thermostat is used to maintain the room temperature. The compressor will cycle on

and off to keep the room at the set level of comfort. Set the thermostat at a lower number and the indoor air will become cooler. Set the thermostat at a higher number and the indoor air will become warmer.

NOTE: If the air conditioner is off and is then turned on while set to a Cool setting or if turned from a fan setting to a Cool setting, it may take approximately

3 minutes for the compressor to start and cooling to begin.

Energy Saver Mode

Controls the fan.

ON—The fan will cycle on and off with the

compressor. This results in wider variations of room temperature and humidity. Normally used when the

room is unoccupied. NOTE: The fan may continue to run for a short time after the compressor cycles off.

GEAppliances.com

Cooling Descriptions

For Normal Cooling—Select the Cool mode and High or Med fan with a middle set temperature.

For Maximum Cooling—Select the Cool mode and High fan with a lower set temperature.

For Quieter and Nighttime Cooling—Select the Cool mode and Low fan with a middle set temperature.

OFF—The fan runs all the time, while the compressor

cycles on and off.

Safety Instructions Operating Instructions Care and Cleaning

Fan Only Mode

Use the Fan Only Mode at Low, Med or High fan

NOTE: Auto Fan Speed cannot be used when in the

speed to provide air circulation and filtering without

Fan Only Mode.

cooling. Since fan-only settings do not provide

 

cooling, a Set temperature cannot be entered. The

 

room temperature will appear

 

in the display.

 

Auto Fan Speed

Set to Auto fan speed for the fan speed to

NOTE: Auto Fan Speed cannot be used when in the

automatically set to the speed needed to provide

Fan Only Mode.

optimum comfort settings with the set temperature.

 

If the room needs more cooling, the fan speed

 

will automatically increase. If the room needs less

 

cooling, the fan speed will automatically decrease.

 

Remote Control

n

To ensure proper operation, aim the remote

n

Make sure nothing is between the air conditioner

 

control at the signal receiver on the air

 

and the remote control that could block the

 

conditioner.

 

signal.

n

The remote control signal has a range of

n

Make sure batteries are fresh and installed

 

up to 20 feet.

 

correctly as indicated on the remote control.

Installation Instructions Troubleshooting Tips

5

Consumer Support

Image 5
Contents Www .GEAppliances .ca 49-7645 04-10 GECanada, contact us at Do not use an adapter plug with this appliance Safety PrecautionsGEAppliances.com USE of Extension CORDS-115-Volt models onlyAbout the controls on the air conditioner Power Outage Recovery FeatureEnergy Saver Mode Cool ModeFan Only Mode Remote ControlCare and cleaning of the air conditioner Tools YOU will Need Before YOU BeginElectrical Requirements Parts Included Installation InstructionsStorm Window Requirements Window RequirementsTo prevent broken glass or Prepare the WindowNormal Operating Sounds Troubleshooting TipsProblem Possible Causes What To Do Care and Cleaning Ownership Registration Page Original purchase Service to replace the defective part What Is Not CoveredGE Will Replace Warrantor General Electric Company . Louisville, KYOne Year Mabe Will ReplaceWarrantor Mabe Canada Inc Burlington, Ontario Conseils de dépannage Bruits normaux de fonctionnement Assistance à la clientèleAvertissement ’UTILISEZ PAS de rallonge avec un modèle à 230/208 Volts Utilisation DE RALLONGES-modèles à 115 Volts uniquementPropos des commandes du climatiseur Mode Cool refroidissement TélécommandeMode Fan Only ventilateur uniquement Auto Fan Speed vitesse du ventilateur autoMise EN Garde NE faites PAS Entretien et nettoyage du climatiseurOutillage Nécessaires Avant DE CommencerExigences Électriques Pièces Inclues Instructions de montageInstruction Relative À LA Fenêtre Préparation DU ClimatiseurLa longueur adéquate. Décollez la pellicule Préparation DE LA FenêtreProtectrice et collez le joint sur le dessous Du cadre de la fenêtreCauses possibles Bruits normaux de fonctionnementProblème Que faireAssistance à Consignes Assistance à Ownership Registration Page Pour la période d’ Nous remplacerons Climatiseur GE-Garantie Limitée D’un AnCe qui n’est pas couvert Garant Mabe Canada Inc Burlington, OntarioAssistance à la clientèle Site Internet GE Producto etiquetado *EnErgy Star Instrucciones de seguridad , 37 Instrucciones de operaciónNo use un enchufe adaptador con este electrodoméstico ¡ADVERTENCIAGEAppliances.com De los modelos de 230/208 voltiosFunción de recuperación de pérdida de energía Acerca de los controles en el acondicionador de aireModo Cool Frío Energy Saver Mode Modo de ahorro de energíaModo de Fan Only Solo ventilador Velocidad de ventilador automáticaPrecaución no Opere el Cuidado y limpieza del acondicionador de aireRequisitos Eléctricos Antes DE IniciarPartes Incluidas Herramientas QUE NecesitaráPrepare EL Acondicionador DE Aire Requisitos Para LA VentanaRequisitos DE UNA Ventana DE Tormentas En ventanas construidas de Prepare LA VentanaDE LA Ventana Sonidos de operación normales Solucionar problemasProblema Causas posibles Qué hacer Lo que no está cubierto GE reemplazaráGarante General Electric Company . Louisville, KY Un añoPágina Web de GE Appliances Servicio al consumidorBy phone at 800.626.2002 during normal business hours Real Life Design Studio

AED12*, AED10*, AEQ12, AEQ10 specifications

The GE AED10*, AED12*, AEQ12, and AEQ10 are sophisticated automated external defibrillators (AEDs) designed to deliver lifesaving treatment during cardiac emergencies. Recognized for their reliability and user-friendly features, these devices are critical tools in promoting cardiac health and enhancing survival rates in cases of sudden cardiac arrest.

One of the standout features of the GE AED series is their intuitive design. The AED10* and AED12* models come equipped with visual and auditory prompts, guiding bystanders through each step of the defibrillation process. This maximizes the likelihood of effective use by untrained individuals, promoting earlier intervention which is vital for survival.

Both the AED10* and AED12* feature a semi-automatic mode, which allows for both automated analysis of the patient’s heart rhythm and manual shock delivery. This flexibility caters to both caregiver preferences and the requirements of the specific emergency situation. The AED12*, in particular, is notable for its advanced capabilities, including real-time ECG monitoring and a built-in memory that stores the event data for later review, enabling healthcare professionals to analyze the situation and fine-tune future emergency responses.

The AEQ12 and AEQ10 also incorporate advanced algorithms that enhance rhythm detection accuracy, ensuring appropriate shocks are delivered only when necessary. These units boast a robust battery life, ensuring they remain functional and ready for use when needed. Their compact and lightweight design makes them portable, enabling quick access in emergencies, whether located in public venues or within private organizations.

In terms of connectivity, both the AEQ12 and AEQ10 support rescue data transmission, allowing incident details to be sent to medical professionals in real time. This feature facilitates a faster response once emergency personnel arrive at the scene, optimizing treatment procedures.

The AED series also emphasizes ruggedness and durability, with many models being resistant to dust and moisture, adhering to high environmental standards. This reliability is crucial, especially in varied locations where the AED may be deployed.

In conclusion, the GE AED10*, AED12*, AEQ12, and AEQ10 are pivotal in emergency care, combining advanced technology, ease of use, and portability. They empower ordinary citizens to act quickly in crises where every second counts, through features that demystify the defibrillation process. As cardiac emergencies can occur anywhere at any time, having these AEDs on hand can significantly improve outcomes during such critical moments.