Pelco es3012 installation manual PIN Holder

Page 8

3 Attach the camera and lens to the

B

mount. Extend the lens to the maximum

 

length before positioning the camera

A

and lens.

 

A.Position the camera and lens so the lens does not extend beyond the end of the mount.

B. Fasten the camera and lens to the mount with the 1/4-20 Phillips screws, lock washers, and flat washers (supplied).

4 Plug the lens control and camera power connectors into the P3 and P6 receptacles on the PC board. Connect the video coax BNC to the camera.

5 Install the camera mount in the enclosure. Insert the pin, on the front of the mount, into the holder on the top of the window bracket. Adjust the camera focus and iris, if neces- sary. Close and latch the enclosure lid.

PIN

PIN

HOLDER

8

Pelco Manual C306M-K (4/05)

Image 8
Contents ES3012 Series Esprit Pelco Manual C306M-K 4/05 Contents List of Tables Esprit ES3012 System Dimensions DrawingList of Illustrations Important Safety Instructions Basic DescriptionModels Installation Camera and Lens InstallationPIN Holder PAN and Tilt Installation RX+ Pelco Manual C306M-K 4/05 TXB Series Translator Board Installation Optional HOW to Remove the PAN and Tilt CoverHOW to Reinstall the PAN and Tilt Cover POWER-UP Display HOW to Operate Your Esprit Integrated Positioning SystemOperation Operating Notes Environmental RangePreset Functions PAN, SCAN, and Tilt SpeedsLens Functions RANDOM, FRAME, and Auto ScanningEsprit Menus PresetsProgramming Accessing Main Menu Preset AZ/EL AZ/EL Line Azimuth Zero Direction Direction Line Display Duration Limit Stops Turning Limit Stops on or OFF Programming Limit StopsScan Limit Stops Pattern Length PAN/SCAN SpeedPark Time POWER-UP Mode Speed Profile Zone Blank Other MenuTroubleshooting Symptom System does not operateSymptom No control/sluggish control Coaxitron Symptom No control RS-422Maintenance Symptom No video or poor videoBaud Rate Switch Setting SW1-4 SW1-5Appendix Table B. Switch Settings for SW2 112 232 Specifications ElectricalALL Others are Inches Regulatory Notices Product Warranty and Return Information ISO9001