DISPLAY DURATION
MAIN MENU
<Limit Stop>
<Other>
EXIT
Other Menu
Park Time | 0 |
Pan/Scan Spd | 7 |
Power Up | Default |
Pat length | 6 min |
Spd Profile 50 MPH wind
<Zone Blank>
<Az/El/Direction>
Exit
Az/El/Direction
Set Azimuth Zero
Az/El
Az/El Line
Direction
Direction Line
Disp Duration
Exit
Display Duration programs the duration the Az/El, Direction, and Zoom labels are displayed on the monitor. The available settings for display duration include the following:
CONSTANT - The label is displayed continuously.
2 SECONDS (default) - The label is displayed for 2 seconds after PTZ functions end.
5 SECONDS - The label is displayed for 5 seconds after PTZ functions end.
10 SECONDS - The label is displayed for 10 seconds after PTZ functions end.
To program the display duration for the Az/El, Direction, and Zoom labels:
1.Program preset 95 (28). The main menu appears.
2.Position the cursor (>) beside Other.
3.Press the Iris Open button to enter the Other menu.
4.Position the cursor (>) beside Az/El/Direction.
5.Press the Iris Open button to enter the Az/El/Direction menu.
6.Position the cursor (>) beside Disp Duration.
7.Press the Iris Open button. The cursor moves to the right.
8.Move the joystick up or down to view the available selections.
9.SELECT – Press the Iris Open button to make a selection. CANCEL – Press the Iris Close button to cancel selection.
Pelco Manual | 23 |