Pelco es3012 installation manual PAN and Tilt Installation

Page 9

PAN AND TILT INSTALLATION

NOTE: The illustrations show the ES3012 Esprit mounted to an EWM wall mount.

1 When installing the ES3012 Esprit system, allow for sufficient clear- ance between the top of the unit and overhead obstructions. This will prevent interference when the en- closure is driven to its maximum el- evation of 40 degrees.

40°

17.06

(43.33)

6.77

(17.20)

4.67 8.30

(11.86) (21.08)

2 Remove the transformer module from the base of the system by loosening the four Phillips screws and lifting the module.

3 Attach the base of the system to an Esprit mount (EWM or EPP) with the three flathead 10-32 x 1/2-inch screws and washers (supplied).

LOOSEN

TRANSFORMER

PHILLIPS

SCREWS

MODULE

BASE

MOUNTING

SCREWS

MOUNT

BASE

01475

Pelco Manual C306M-K (4/05)

9

Image 9
Contents ES3012 Series Esprit Pelco Manual C306M-K 4/05 Contents Esprit ES3012 System Dimensions Drawing List of IllustrationsList of Tables Important Safety Instructions Description ModelsBasic Camera and Lens Installation InstallationPIN Holder PAN and Tilt Installation RX+ Pelco Manual C306M-K 4/05 HOW to Remove the PAN and Tilt Cover TXB Series Translator Board Installation OptionalHOW to Reinstall the PAN and Tilt Cover HOW to Operate Your Esprit Integrated Positioning System POWER-UP DisplayOperation Operating Notes Environmental RangePAN, SCAN, and Tilt Speeds Preset FunctionsLens Functions RANDOM, FRAME, and Auto ScanningPresets ProgrammingEsprit Menus Accessing Main Menu Preset AZ/EL AZ/EL Line Azimuth Zero Direction Direction Line Display Duration Programming Limit Stops Limit Stops Turning Limit Stops on or OFFScan Limit Stops PAN/SCAN Speed Park TimePattern Length POWER-UP Mode Speed Profile Other Menu Zone BlankSymptom System does not operate TroubleshootingSymptom No control/sluggish control Coaxitron Symptom No control RS-422Symptom No video or poor video MaintenanceSwitch Setting SW1-4 SW1-5 AppendixBaud Rate Table B. Switch Settings for SW2 112 232 Electrical SpecificationsALL Others are Inches Regulatory Notices Product Warranty and Return Information ISO9001