Pelco es3012 installation manual Azimuth Zero

AZIMUTH ZERO

MAIN MENU

<Limit Stop>

<Other>

EXIT

Other Menu

Park Time	0
Pan/Scan Spd	7
Power Up	Default
Pat length	6 min

Spd Profile 50 MPH wind

<Zone Blank>

<Az/El/Direction>

Exit

Az/El/Direction

Set Azimuth Zero

Az/El

Az/El Line

Direction

Direction Line

Disp Duration

Exit

Azimuth is the pan angle from 0° to 359°. Azimuth zero is the programmed 0° point that is normally set to magnetic north. Once programmed, on-screen pan position (azimuth) and compass readings are based on the set azimuth zero point.

To set azimuth zero:

1.Program preset 95 (28). The main menu appears.

2.Position the cursor (>) beside Other.

3.Press the Iris Open button to enter the Other menu.

4.Position the cursor (>) beside Az/El/Direction.

5.Press the Iris Open button to enter the Az/El/Direction menu.

6.Position the cursor (>) beside Set Azimuth Zero.

7.Press the Iris Open button. The programming menu for Set Azimuth Zero appears on the monitor.

8.Use the joystick to pan the Esprit unit to the desired azimuth zero (0° point) position.

9.Press the Iris Open button to set the azimuth zero position.

20 Pelco Manual C306M-K (4/05)