Pelco c1487-c operation manual Programming the Spectra II and Spectra Lite

PROGRAMMING THE SPECTRA II™ AND SPECTRA LITE™

The Spectra II™ and Spectra Lite™ domes can be programmed for the following functions.

(In this section, an asterisk denotes items that apply to Spectra II only.)

AGC (automatic gain control)	Auto park time	Power-up mode
Alarm dwell*	Auxiliary relays*	Proportional panning*
Alarm pattern*	Backlight compensation	Scan speed
Alarm priority*	Camera reset	Sharpness
Alarm resume*	Gain	Shutter speed
Auto flip disable	Limit stops	Video zone blanking*
Auto focus*	Pattern length*	White balance
Auto iris	Power line synchronization*	Zoom limit*

The main menu contains six secondary menus for Spectra II™ and three for Spectra Lite™.

•	Camera	•	Aux*
•	Line Sync*	•	Alarms, Zone Blank*
•	Power Up Mode	•	Other

Each secondary menu has submenus, which are structured as shown below.

1.Camera

	First Camera Submenu	Second Camera Submenu
	Backlight comp	Shutter speed
	Zoom limit*	Auto focus mode*
	Reset camera	Sharpness
	Gain/AGC	Auto sharpness
	AGC mode	Sharpness
	Gain	White balance
	Auto-iris	Auto white bal
	Auto-iris mode	R-B white bal
	Auto-iris level	M-G white bal
	Auto-iris peak	Prev (to first camera submenu)
	Next (to second camera submenu)
2.	Line Sync*
	Line sync*
	Line sync phase*
3.	Power Up
	Power Up
4.	Aux*
	Aux 1 mode*
	Aux 2 mode*
5.	Alarm, Zone Blank*
	Alarm resume*
	Alarm dwell sec*
	Alarm priority*
	Alarm pattern*
	Zone blank*
6.	Other
	Auto flip
	Proportional pan*
	Limit stops
	Park time minutes
	Scan speed deg/s
	Pattern length*

The following sections explain how to program the Spectra II™ and Spectra Lite™ domes using the menu choices.

28 Pelco Manual C1487M-C (7/99)