USER INSTRUCTIONS
5. Cleaning the E-studio
MAKE SURE THE FIRE AND SURROUND ARE COOL BEFORE TRYING TO CLEAN.
5.1Remove the glass window by unscrewing the four screws in the retaining bracket, Diagram 2.
2
|
|
|
|
|
|
|
|
| |
AR1767 |
| |||
|
|
|
|
|
|
|
|
|
|
5.2To clean the glass surface, Gazco recommends you use a ceramic glass product generally sold for cleaning ceramic hobs.
5.3Remove the granite chippings and place on a dry clean surface. Do not remove the enamel back panel.
Use a damp cloth and mild non abrasive cleaner on the enamel back panel.
5.4Clean the burner and tray assembly using a vacuum cleaner with a soft brush attachment. Ensure all debris is removed from the burner ports.
5.5Replace the granite chippings by referring to Section 7 for
6.Cleaning the logic-e box
MAKE SURE THE FIRE AND SURROUND ARE COOL BEFORE TRYING TO CLEAN.
6.1Remove the glass window by unscrewing the four screws in the retaining bracket, Diagram 3.
6.2To clean the glass surface, Gazco recommends you use a ceramic glass product generally sold for cleaning ceramic hobs.
3 |
|
LOGIC | AR1377 |
|
6.3Remove the ceramic coals and place on a dry, clean surface. Remove the fuel bed and burner cover gasket.
6.4Clean the burner and tray assembly using a vacuum cleaner with a soft brush attachment, Ensure all debris is removed from the burner ports.
6.5Replace the ceramics by referring to Section 8 for the Logic
7. E-STUDIO
ARRANGEMENT OF FUEL BED
COMPONENTS
ONLY USE THE CORRECT TYPE AND QUANTITY OF GRANITE CHIPPINGS. Always follow the fuel bed layout as stated in these instructions. NEVER change the layout from that shown here.
7.1Arrange the granite chippings in the areas highlighted in Diagram 4. Granite chippings should be evenly distributed.
4
AR1768
5