Stovax PR0741 manual AR1931

Page 19

INSTALLATION INSTRUCTIONS

INSTALLATION

NOTE: IT IS IMPORTANT TO ENSURE THAT THE PANEL LOCATES TIGHTLY AGAINST THE BURNER TRAY.

13

AR1931

8. E-STUDIO

ARRANGEMENT OF FUEL BED

COMPONENTS

ONLY USE THE CORRECT TYPE AND QUANTITY OF GRANITE CHIPPINGS. Always follow the fuel bed layout as stated in these instructions. NEVER change the layout from that shown here.

8.1Arrange the granite chippings in the areas highlighted in Diagram 14. Granite chippings should be evenly distributed.

14

AR1768

8.2Lean the granite chippings against the burner ledges to disguise the ledges.

15

AR1769

8.3Check that the port area. Arrow A, is clear of granite chippings. This can be easily done by gently running a screwdriver or similar object along this area. Diagram 16.

16

A

AR1768

NOTE: IT IS IMPORTANT THE GRANITE CHIPPINGS DO NOT COVER THE PORT AREA IN BETWEEN THE BURNER LEDGES.

8.4Ensure that no pebbles over-hang or fill the pilot area, Arrow C, Diagram 17.

NOTE: CHIPPINGS SHOULD NOT BE PLACED DIRECTLY IN FRONT OF THE PILOT CROSS LIGHTING FLAME.

17

C

AR1770

8.5Ensure that the fibre glass window seal on the box is intact, then lower the glass window into the hooks on the box. Secure the window using four screws in the retaining bracket. See diagram 18.

18

AR 1767

19

Image 19

Contents Studio& Logic E-box Contents GAS CHECK APPLIANCE COMMISSIONING CHECKLISTFLUE CHECK Pass FailTurning the Fire OFF User InstructionsGeneral Lighting the FireCleaning the logic-e box Cleaning the E-studioStudio Arrangement of Fuel BED Components AR1769 Logic E-BOX ADVICE ON HANDLING AND DISPOSAL OF FIRE CERAMICSArrangEMENT of fuel bed Components Large Medium Small Pebble Layout Running Installation detailsOxygen depletion sensor Flame failure deviceP8691CFCHUC Installation InstructionsTechnical Specification Studiomodels 8691CFCHUCHolyrood Spanish Finish Arts FrameOverall External Dimensions Plan View Flue and Chimney Requirements Site RequirementsFire Location Ventilation GAS SupplyAIR Vents Must not be Restricted Installation of the GAS Supply InstallationControl Upgrade Safety PrecautionsCable Retention Method Installation of the FireScrew Fixing Method Fitting the Decorative Inner panelAR1931 Logic E-BOX arrangEMENT of fuel bed components AR1364 Pebble Layout Lighting the fire Installation / CommissioningCommissioning Servicing Servicing InstructionsServicing Requirements Studio & Logic E-BOX Servicing Instructions Fault Finding Charts Fault Finding Charts Piezo Replacing PartsGeneral Ignition LeadPilot injector Ignition electrode Thermocouple Ods pilot unitMag unit Gas valveMain injector Spare parts list Logic E-BOX Spare parts list-E-STUDIOChanging between gas types Service Records