INSTALLATION INSTRUCTIONS
INSTALLATION
Pebble Layout
9.12Position the pebble flame baffle centrally on the tray and ensure the stepped lower edge engages against the rear edge of the burner skin, Diagram 30
30
AR1406
9.13Place the front pebble piece centrally in the channel at the front of the tray, Diagram 31.
31
AR1407
9.14Place the four pebbles as identified resting between the front ceramic and the flame baffle as shown in diagram 32.
32
A4 | A5 | A3 | A6 | AR1408 |
9.15Place the next four pebbles as identified resting between the flame baffle and the first row of pebbles as shown in diagram 33.
33
A1 |
| A2 |
| A1 |
|
|
AR1409 | ||||||
|
|
|
|
|
|
|
9.16Place the remaining two pebbles identified as shown in diagram 34.
34
A3 | A3 |
|
AR1410
9.17The coals/pebbles should evenly cover the whole bed with the gaps between them kept equal. This will maximise the performance of the product
9.18ENSURE THAT THE COALS/PEBBLES ARE POSITIONED AS ABOVE. ONLY USE THE CORRECT AMOUNT OF COALS/PEBBLES AS SPECIFIED IN THE DIAGRAMS.
9.19Ensure that the fibre glass window seal on the box is intact, then lower the glass window into the hooks on the box. Secure the window using four screws in the retaining bracket. See diagram 35.
35
|
| AR1380 | |
AR1377 | |||
|
| ||
|
|
|
NEVER OPERATE THE FIRE WHEN THE GLASS
PANEL IS REMOVED OR BROKEN
22