Marmitek TOTALGUARD Installing the sensors, Door/Window Sensor DS90, Using the Door/Window Sensor

Page 14

BASIC OPTIONS

4. Installing the sensors

4.1 Door/Window Sensor DS90

1.Transmitter part.

2.Magnet contact.

3.Control Indicator – Lights up when a signal is transmitted.

4.Screw for opening the sensor.

5.Switch for entry delays.

6.Connection for extra wired contact (9.4).

7.Battery compartment.

8.Screw holes for mounting the sensor.

9.Tamper contact.

48

7

3

5

9

8

6

4.1.1Mounting the Door/Window Sensor DS90 1. Open the casing by removing screw (4). Mount

the transmitter part on the frame of your door

or window. Do not close the casing yet.

2

1

2. Mount the magnet on the moving part of your

 

 

door of window. Make sure that the arrows on

the transmitter part (see the lid!) and the magnet are facing each other when the door or window is closed. Keep the distance between the transmitter part and the magnet (when door or window is closed) as small as possible (max. 4 mm).

☺If your window or doorframe is slightly countersunk, you can also place the transmitter part and the magnet at a 90-degree angle.

☺Once you have decided on a definite place for the sensor, we advise to also fix the magnet with screws (included).

☺ Aluminium/synthetic frames

Place the sensor as high as possible: This gives the best range. Mark the place for the transmitter and the magnet. Do not place the magnet directly on a metal surface. In case of metal frames, or synthetic frames with a metal core, place a piece of wood or plastic (min. 5mm thick) between the magnet and the frame. On metal frames the space between the sensor and the magnet should be no more than 3mm when the window or door is closed.

☺Sliding windows

In case of sliding windows the sensor and magnet should NOT be allowed to slide along each other horizontally. Place the sensor and magnet in such a way that when closing the window the magnet and sensor approach each other vertically.

4.1.2 Using the Door/Window Sensor

1.If you have not yet opened the transmitter, please do so now by unscrewing screw (4).

2.Insert the batteries (2xAAA, alkaline) into the battery compartment. Do not forget to check the polarity.

3.Set the switch for entry delay (5) to MIN when you have installed the sensor on a window and on MAX when the sensor is installed on a door. When the switch is set to MAX, you have time to open and close the door (standard setting 30 sec). This delay to enter your house and switch off the system without triggering the alarm can be altered (see 8.1). If you want an instant alarm (on e.g. the backdoor), set the switch to MIN.

4.Keep the tamper contact (9) on the transmitter pressed for 4 seconds. Release the button. The door/window sensor has now chosen a unique code, which can be registered with your console.

14

MARMITEK

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Safeguardsafeguard TOTALGUARDTOTALGUARDtm Introduction Safety warnings Basic OptionsExtra Options Introduction Safety warnings Contents of your set Your Marmitek surveillance systemMarmitek TotalGuard-systeem Important propertiesSignal range Security consoleInstalling the console Menus Setting the console on a flat surfaceMounting the security console Mounting the console onto the wallChoosing your language P T I O N SMenu in English Using the Key Chain Remote Control Installing remote controlsKey Chain Remote Control KR21 Registering the Key Chain Remote ControlUsing the Comfort Remote Control Registering the Comfort Remote ControlDoor/Window Sensor DS90 Installing the sensorsUsing the Door/Window Sensor Motion Detector MS90 Registering a Door/Window SensorRegistering a Motion Detector Using the Motion DetectorTest mode Testing the location of your motion detector Smoke Detector SD10 / SD90 Setting up the security console SC9000Setting the clock Phone Storing phone numbersRecording your own message Using the security system Setting the alarmPanic alarm Switching on the ARM Home functionDisarming the system What happens when the alarm goes off?Error messages SirenPrevention and comfort ‘Home Automation’ IntroductionAddressing your modules Alarm functions of the Lamp/Dimmer ModulesComfort functions of the KR21 Key Chain Remote Control Switch 4 in Setting Comfort functions of the SH624 Comfort Remote ControlSetting the timer Comfort functions of the security consoleOnce only Clearing the timer settingsDaily RandomClearing the memory of your security system Setting the delaysAdvanced system functions Advanced security functions Changing the access code PINDisarming the siren for silent alarm Activating the chimeUsing wired inputs Adding a wired sensor to the Door/Window Sensor DS90Emergency sensors always mode Deregistering a Door/Window SensorDeregistering a Motion Detector Installing an extra siren Marmitek PH7208, art. noAdvanced Home Automation functions Checking the status of the security systemUsing an external universal siren Basic address for Home Automations functionsC1 and C2 Activating the call-in function Telephone functionsCalling the security system Operate lights and equipment via an outside phone Operating the alarm functions via an outside phoneChanging the batteries Console 4xAA batteriesDoor/Window Sensor DS90 2x AAA batteries Key Chain Remote Control KR21 2x CR2016 batteriesComfort Remote Control SH624 4x AAA batteries Motion Detector MS90 2x AA batteriesFrequently asked questions Tabel Sensors Technical Data Standard for TotalGuard, optional for SafeGuardDeclaration of Conformity Marmitek BV PO. BOX 4257 5604 EG Eindhoven Netherlands

TOTALGUARD specifications

Marmitek TOTALGUARD is a comprehensive security solution designed to enhance the safety and security of homes and businesses. This advanced system integrates cutting-edge technologies to provide a robust protective measure against unauthorized access, theft, and other security threats.

One of the standout features of TOTALGUARD is its user-friendly interface. The system is designed for simplicity, allowing users to easily control and monitor their security settings via a dedicated mobile app. This app offers real-time notifications and allows users to receive alerts about any suspicious activities, ensuring immediate response to potential threats.

TOTALGUARD employs a range of high-tech sensors and cameras that deliver high-definition video surveillance around the clock. Its motion detection capabilities are finely tuned, allowing the system to differentiate between normal activity and potential intrusions. This minimizes false alarms, giving users peace of mind that their property is protected without the constant interruptions of unnecessary alerts.

The system is also equipped with smart home integration features, making it compatible with popular smart home devices. This connectivity means that homeowners can integrate their security system with other elements of their smart home – such as lighting and climate control – to create a comprehensive safety net. When an alert is triggered, smart lights can turn on to deter intruders, and connected devices can alert users to any unusual activity in their vicinity.

One of the key characteristics of the TOTALGUARD system is its scalability. Whether you live in a small apartment or manage a large commercial facility, the system can be expanded by adding more sensors, cameras, and modules as needed. This adaptability makes it an ideal choice for a variety of users and settings.

In addition, TOTALGUARD features advanced encryption protocols that ensure the security of data transmission between devices, safeguarding sensitive information from cyber threats. This level of security is crucial in today's digital landscape where security breaches can occur remotely.

Lastly, the Marmitek TOTALGUARD system is designed to be easily installed without the need for professional assistance, making it accessible to a wide range of consumers. With its combination of advanced technology, ease of use, and flexibility, TOTALGUARD represents a formidable solution for anyone looking to enhance their security measures in an increasingly uncertain world.
Top Page Image Contents