Marmitek TOTALGUARD manual Clearing the timer settings, Daily, Once only, Random

Page 25

BASIC OPTIONS

9.Enter the time you want to lights to be switched off (24 hour notation). If you make a mistake, press CLEAR. Press OK when you do not want to enter a switch-off time.

10.The bottom line on the display now reads 1. DAILY.

11. Use the menu buttons / to select:

1.	DAILY:	The timer setting is executed daily.
2.	ONCE ONLY:	The timer setting is only used today.
3.	RANDOM:	The timer setting is executed daily, but varies within the hour
		entered (if you entered 20:30, the time may vary between 20:00 and 20:59).
4.	ARMED ONLY:	The timer setting is only executed when the system is in ARMED AWAY mode.

12.Make your choice and press OK. The display now reads ‘NEW TIMER’.

13.Press CLEAR again to quit the menu. To confirm your choice, press 1 for Yes or 2 for No. If you choose Yes, you will quit the menu. If you choose No, you go back to the main menu.

7.9 Clearing the timer settings

1. To access the menu, press the menu or menu button. The display will now read ‘ENTER PIN’.

2.Enter your 4-digit PIN code (factory setting 0000. See 8.3 for changing the PIN code). For every digit entered, a * will appear on the display.

3.When the PIN code has been entered correctly, the word ‘INSTALL’ will show up on the display.

4.	Use the menu buttons	/	to go to menu item 9. SET TIMER. Press OK to select this menu item. You can also go to this menu
	item directly by pressing a 9 on the number pad.
5.	The display will read ‘NEW TIMER’.
6.	Use the menu buttons	/	to check timers you set before. The timers are shown in the following format:

12ON 12:40 OFF 18:30

7.When a timer is shown, you can press CLEAR to delete the timer.

8.You need to confirm your choice (CLEAR TIMER). Press1 for Yes and 2 for No.

9.Press CLEAR again to quit the menu.

SAFEGUARD / TOTALGUARD

25

Image 25

Contents Safeguardsafeguard TOTALGUARDTOTALGUARDtm Basic Options Introduction Safety warningsExtra Options Introduction Safety warnings Your Marmitek surveillance system Contents of your setImportant properties Marmitek TotalGuard-systeemSecurity console Signal rangeInstalling the console Mounting the security console Setting the console on a flat surfaceMenus Mounting the console onto the wallP T I O N S Choosing your languageMenu in English Key Chain Remote Control KR21 Installing remote controlsUsing the Key Chain Remote Control Registering the Key Chain Remote ControlRegistering the Comfort Remote Control Using the Comfort Remote ControlUsing the Door/Window Sensor Installing the sensorsDoor/Window Sensor DS90 Registering a Door/Window Sensor Motion Detector MS90Test mode Testing the location of your motion detector Using the Motion DetectorRegistering a Motion Detector Setting the clock Setting up the security console SC9000Smoke Detector SD10 / SD90 Recording your own message Storing phone numbersPhone Setting the alarm Using the security systemSwitching on the ARM Home function Panic alarmError messages What happens when the alarm goes off?Disarming the system Siren Introduction Prevention and comfort ‘Home Automation’Comfort functions of the KR21 Key Chain Remote Control Alarm functions of the Lamp/Dimmer ModulesAddressing your modules Setting the timer Comfort functions of the SH624 Comfort Remote ControlSwitch 4 in Setting Comfort functions of the security consoleDaily Clearing the timer settingsOnce only RandomAdvanced system functions Setting the delaysClearing the memory of your security system Disarming the siren for silent alarm Changing the access code PINAdvanced security functions Activating the chimeAdding a wired sensor to the Door/Window Sensor DS90 Using wired inputsDeregistering a Door/Window Sensor Emergency sensors always modeAdvanced Home Automation functions Installing an extra siren Marmitek PH7208, art. noDeregistering a Motion Detector Checking the status of the security systemBasic address for Home Automations functions Using an external universal sirenC1 and C2 Calling the security system Telephone functionsActivating the call-in function Changing the batteries Operating the alarm functions via an outside phoneOperate lights and equipment via an outside phone Console 4xAA batteriesComfort Remote Control SH624 4x AAA batteries Key Chain Remote Control KR21 2x CR2016 batteriesDoor/Window Sensor DS90 2x AAA batteries Motion Detector MS90 2x AA batteriesFrequently asked questions Tabel Sensors Standard for TotalGuard, optional for SafeGuard Technical DataMarmitek BV PO. BOX 4257 5604 EG Eindhoven Netherlands Declaration of Conformity