Marmitek TOTALGUARD manual Security console, Signal range

Page 7
6
10
7

BASIC OPTIONS

•You can use up to 16 wireless remote controls.

•2 inputs for wired sensors.

•Silent alarm possible (no siren).

•By calling the system, you can control the system remotely and check the status. The TotalGuard also lets you switch on the lights.

•Prevention: Your lights are switched on and off in such a way that it appears as if you are home.

1.2 Signal range

The sensors have an open field range of 100 m. Walls, ceilings and other large object will influence the range. The range depends on your personal living conditions, but is usually between 15 and 30 m.

One other factor that can decrease the range is the presence of other distorting high-frequency signals on the same frequency (433MHz). RF wireless headphones and wireless speakers can influence the range. They cannot cause a false alarm. Wireless phones or networks do not influence the system.

2.The security console

(1) Display.

(2)ARM HOME button Alarm function for when

you are at home. All

Door/Window Sensors are8 activated, but the Motion

Detectors remain unarmed.

(3)ARM AWAY button

Full alarm. All sensors are activated.

(4)ARMED Indicator

Lights up when the alarm is switched on.

(5)BATTERY Indicator

 

Lights up when the back-

 

 

 

 

 

 

 

 

up batteries are empty or

 

 

 

 

 

 

 

 

not installed.

4 5

1

2 3

18 11 9

16

 

13

(6)

Telephone connection.

 

(7)

AC adapter connection.

 

 

 

14

15

17

12

(8)

Wired inputs.

 

 

 

 

 

 

 

 

 

 

(9)Tamper contact.

(10)Emergency battery compartment.

(11)Console buttons.

(12)

Menu Start

- Call up the menu or step up in the menu.

(13)

Menu Start

- Call up the menu or step down in the menu.

(14)ON - Switch on a Marmitek X-10 Module (see 7.7).

(15)OFF - Switch off a Marmitek X-10 Module (see 7.7).

(16)OK - Confirm setting.

(17)Clear/bypass - Clear the setting, go up one level in the menu, Bypass function for switching of a sensor.

(18)Built-in microphone.

SAFEGUARD / TOTALGUARD

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Safeguardsafeguard TOTALGUARDTOTALGUARDtm Basic Options Introduction Safety warningsExtra Options Introduction Safety warnings Your Marmitek surveillance system Contents of your setImportant properties Marmitek TotalGuard-systeemSecurity console Signal rangeInstalling the console Mounting the console onto the wall Setting the console on a flat surfaceMounting the security console MenusP T I O N S Choosing your languageMenu in English Registering the Key Chain Remote Control Installing remote controlsKey Chain Remote Control KR21 Using the Key Chain Remote ControlRegistering the Comfort Remote Control Using the Comfort Remote ControlUsing the Door/Window Sensor Installing the sensorsDoor/Window Sensor DS90 Registering a Door/Window Sensor Motion Detector MS90Test mode Testing the location of your motion detector Using the Motion DetectorRegistering a Motion Detector Setting the clock Setting up the security console SC9000Smoke Detector SD10 / SD90 Recording your own message Storing phone numbersPhone Setting the alarm Using the security systemSwitching on the ARM Home function Panic alarmSiren What happens when the alarm goes off?Error messages Disarming the systemIntroduction Prevention and comfort ‘Home Automation’Comfort functions of the KR21 Key Chain Remote Control Alarm functions of the Lamp/Dimmer ModulesAddressing your modules Comfort functions of the security console Comfort functions of the SH624 Comfort Remote ControlSetting the timer Switch 4 in SettingRandom Clearing the timer settingsDaily Once onlyAdvanced system functions Setting the delaysClearing the memory of your security system Activating the chime Changing the access code PINDisarming the siren for silent alarm Advanced security functionsAdding a wired sensor to the Door/Window Sensor DS90 Using wired inputsDeregistering a Door/Window Sensor Emergency sensors always modeChecking the status of the security system Installing an extra siren Marmitek PH7208, art. noAdvanced Home Automation functions Deregistering a Motion DetectorBasic address for Home Automations functions Using an external universal sirenC1 and C2 Calling the security system Telephone functionsActivating the call-in function Console 4xAA batteries Operating the alarm functions via an outside phoneChanging the batteries Operate lights and equipment via an outside phoneMotion Detector MS90 2x AA batteries Key Chain Remote Control KR21 2x CR2016 batteriesComfort Remote Control SH624 4x AAA batteries Door/Window Sensor DS90 2x AAA batteriesFrequently asked questions Tabel Sensors Standard for TotalGuard, optional for SafeGuard Technical DataMarmitek BV PO. BOX 4257 5604 EG Eindhoven Netherlands Declaration of Conformity

TOTALGUARD specifications

Marmitek TOTALGUARD is a comprehensive security solution designed to enhance the safety and security of homes and businesses. This advanced system integrates cutting-edge technologies to provide a robust protective measure against unauthorized access, theft, and other security threats.

One of the standout features of TOTALGUARD is its user-friendly interface. The system is designed for simplicity, allowing users to easily control and monitor their security settings via a dedicated mobile app. This app offers real-time notifications and allows users to receive alerts about any suspicious activities, ensuring immediate response to potential threats.

TOTALGUARD employs a range of high-tech sensors and cameras that deliver high-definition video surveillance around the clock. Its motion detection capabilities are finely tuned, allowing the system to differentiate between normal activity and potential intrusions. This minimizes false alarms, giving users peace of mind that their property is protected without the constant interruptions of unnecessary alerts.

The system is also equipped with smart home integration features, making it compatible with popular smart home devices. This connectivity means that homeowners can integrate their security system with other elements of their smart home – such as lighting and climate control – to create a comprehensive safety net. When an alert is triggered, smart lights can turn on to deter intruders, and connected devices can alert users to any unusual activity in their vicinity.

One of the key characteristics of the TOTALGUARD system is its scalability. Whether you live in a small apartment or manage a large commercial facility, the system can be expanded by adding more sensors, cameras, and modules as needed. This adaptability makes it an ideal choice for a variety of users and settings.

In addition, TOTALGUARD features advanced encryption protocols that ensure the security of data transmission between devices, safeguarding sensitive information from cyber threats. This level of security is crucial in today's digital landscape where security breaches can occur remotely.

Lastly, the Marmitek TOTALGUARD system is designed to be easily installed without the need for professional assistance, making it accessible to a wide range of consumers. With its combination of advanced technology, ease of use, and flexibility, TOTALGUARD represents a formidable solution for anyone looking to enhance their security measures in an increasingly uncertain world.
Top Page Image Contents