Marmitek TOTALGUARD manual Telephone functions, Calling the security system

Page 33

EXTRA OPTIONS

☺If you set the UnitCode for the console to e.g. A16, the comfort lighting will get addresses A16 and A1.

To change the UnitCode:

1. To access the menu, press the menu or menu button. The display will now read ‘ENTER PIN’.

2.Enter your 4-digit PIN code (factory setting 0000. See 8.3 for changing the PIN code). For every digit entered, a * will appear on the display.

3.When the PIN code has been entered correctly, the word ‘INSTALL’ will show up on the display.

4.

Use the menu buttons

/

to go to menu item 7. OPTIONS. Press OK to select this menu item. You can also go to this menu

 

item directly by pressing a 7 on the number pad.

5.

Use the menu buttons

/

to go to menu item UNITCODE. Press OK to select this menu item.

6.

Use the menu buttons

/

to select the desired UnitCode and press OK.

7.

Press CLEAR again to quit the menu.

11. Telephone functions

11.1 Calling the security system

The SC9000 alarm system is equipped with a call-in function. This means that you can ring your console remotely via any telephone or mobile phone. You can also control your lights and devices via your phone. The system has a built-in speech chip that guides you through the menus.

11.2 Activating the call-in function

The call-in function is switched off in the factory settings. You can switch the function on via the menu OPTIONS/ANSWER TYPE.

You can choose one of the following three options:

ANSWER ON:

Call-in activated. The time delay before the console answers the phone can be set in the menu DELAYS/ANSWER DELAY (see 8.1). The standard delay is 30 seconds. If you use an answer phone or voice mail, we advise you to use option 3: VOICE MAIL.

ANSWER OFF:

the call-in function is deactivated (standard setting).

VOICE MAIL:

Call-in activated. Choose this option when you use the standard voicemail system offered by your telecom supplier. To access the console, ring your home number twice. Let the phone ring for 10 seconds the first time. Hang up the phone and ring the number again after 10 seconds, but within 30 seconds. The console will answer the phone.

Setting the call-in function:

1. To access the menu, press the menu or menu button. The display will now read ‘ENTER PIN’.

2.Enter your 4-digit PIN code (factory setting 0000. See 8.3 for changing the PIN code). For every digit entered, a * will appear on the display.

3.When the PIN code has been entered correctly, the word ‘INSTALL’ will show up on the display.

4.

Use the menu buttons

/

to go to menu item 7. OPTIONS. Press OK to select this menu item. You can also go to this menu

 

item directly by pressing a 7 on the number pad.

5.

Use the menu buttons

/

to go to menu item ANSWER TYPE. Press OK to select this menu item.

6.

You can now select ANSWER ON, ANSWER OFF or VOICE MAIL.

7.

Use the menu buttons

/

to go to the desired menu item and press OK.

8.

Press CLEAR again to quit the menu.

SAFEGUARD / TOTALGUARD

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Safeguardsafeguard TOTALGUARDTOTALGUARDtm Basic Options Introduction Safety warningsExtra Options Introduction Safety warnings Your Marmitek surveillance system Contents of your setImportant properties Marmitek TotalGuard-systeemSecurity console Signal rangeInstalling the console Mounting the security console Setting the console on a flat surfaceMenus Mounting the console onto the wallP T I O N S Choosing your languageMenu in English Key Chain Remote Control KR21 Installing remote controlsUsing the Key Chain Remote Control Registering the Key Chain Remote ControlRegistering the Comfort Remote Control Using the Comfort Remote ControlInstalling the sensors Using the Door/Window SensorDoor/Window Sensor DS90 Registering a Door/Window Sensor Motion Detector MS90Using the Motion Detector Test mode Testing the location of your motion detectorRegistering a Motion Detector Setting up the security console SC9000 Setting the clockSmoke Detector SD10 / SD90 Storing phone numbers Recording your own messagePhone Setting the alarm Using the security systemSwitching on the ARM Home function Panic alarmError messages What happens when the alarm goes off?Disarming the system SirenIntroduction Prevention and comfort ‘Home Automation’Alarm functions of the Lamp/Dimmer Modules Comfort functions of the KR21 Key Chain Remote ControlAddressing your modules Setting the timer Comfort functions of the SH624 Comfort Remote ControlSwitch 4 in Setting Comfort functions of the security consoleDaily Clearing the timer settingsOnce only RandomSetting the delays Advanced system functionsClearing the memory of your security system Disarming the siren for silent alarm Changing the access code PINAdvanced security functions Activating the chimeAdding a wired sensor to the Door/Window Sensor DS90 Using wired inputsDeregistering a Door/Window Sensor Emergency sensors always modeAdvanced Home Automation functions Installing an extra siren Marmitek PH7208, art. noDeregistering a Motion Detector Checking the status of the security systemBasic address for Home Automations functions Using an external universal sirenC1 and C2 Telephone functions Calling the security systemActivating the call-in function Changing the batteries Operating the alarm functions via an outside phoneOperate lights and equipment via an outside phone Console 4xAA batteriesComfort Remote Control SH624 4x AAA batteries Key Chain Remote Control KR21 2x CR2016 batteriesDoor/Window Sensor DS90 2x AAA batteries Motion Detector MS90 2x AA batteriesFrequently asked questions Tabel Sensors Standard for TotalGuard, optional for SafeGuard Technical DataMarmitek BV PO. BOX 4257 5604 EG Eindhoven Netherlands Declaration of Conformity

TOTALGUARD specifications

Marmitek TOTALGUARD is a comprehensive security solution designed to enhance the safety and security of homes and businesses. This advanced system integrates cutting-edge technologies to provide a robust protective measure against unauthorized access, theft, and other security threats.

One of the standout features of TOTALGUARD is its user-friendly interface. The system is designed for simplicity, allowing users to easily control and monitor their security settings via a dedicated mobile app. This app offers real-time notifications and allows users to receive alerts about any suspicious activities, ensuring immediate response to potential threats.

TOTALGUARD employs a range of high-tech sensors and cameras that deliver high-definition video surveillance around the clock. Its motion detection capabilities are finely tuned, allowing the system to differentiate between normal activity and potential intrusions. This minimizes false alarms, giving users peace of mind that their property is protected without the constant interruptions of unnecessary alerts.

The system is also equipped with smart home integration features, making it compatible with popular smart home devices. This connectivity means that homeowners can integrate their security system with other elements of their smart home – such as lighting and climate control – to create a comprehensive safety net. When an alert is triggered, smart lights can turn on to deter intruders, and connected devices can alert users to any unusual activity in their vicinity.

One of the key characteristics of the TOTALGUARD system is its scalability. Whether you live in a small apartment or manage a large commercial facility, the system can be expanded by adding more sensors, cameras, and modules as needed. This adaptability makes it an ideal choice for a variety of users and settings.

In addition, TOTALGUARD features advanced encryption protocols that ensure the security of data transmission between devices, safeguarding sensitive information from cyber threats. This level of security is crucial in today's digital landscape where security breaches can occur remotely.

Lastly, the Marmitek TOTALGUARD system is designed to be easily installed without the need for professional assistance, making it accessible to a wide range of consumers. With its combination of advanced technology, ease of use, and flexibility, TOTALGUARD represents a formidable solution for anyone looking to enhance their security measures in an increasingly uncertain world.
Top Page Image Contents