Marmitek TOTALGUARD manual Using an external universal siren

Page 31

EXTRA OPTIONS

10.3 Using an external universal siren

You can also add sirens and warning lights that are not part of the Marmitek range. Please use a separately available Marmitek AD10 (art. no. 08933), AW12 (09463) or the AM12 (art. no. country specific, see www.marmitek.com/plug-in).

Set this module to address B2. The module is switched on in case of an alarm and switched off after 4 minutes.

10.4 Transceiver function

The Marmitek X-10 range contains several wireless remote controls that you can use to control your Marmitek X-10 modules (such as a universal remote control for your TV, audio equipment and Marmitek X-10). These remote controls use the RF system, which means the remote control signal goes through walls and ceilings. See www.marmitek.com/x10wireless for more information. Your console will convert these remote control RF signals to X-10 signals and transmit them via the mains. You can then control the Marmitek X-10 modules using these transmitters.

10.5 All Home Automation functions at a glance

Name

Description

Module set to address

 

 

 

Comfort lighting

You can switch your lighting using the buttons Lights ON and

 

 

Lights OFF on your key chain remote control.

A1 and A2

Exit delay

Lights are switched on during the exit delay.

A1 and A2

 

 

 

Alarm lighting

In the case of an alarm, the lights will flash during 4 minutes and

 

 

then remain on.

A1 and A2

Status indicator

The lights are switched on when the system is set to ARM AWAY.

B1

 

 

 

External Siren PH7208

Extra 110dB siren.

A1 or A2

 

 

 

Extra universal siren

Connect your own siren to a Marmitek AM12 or AD10 module.

B2

 

 

 

This table uses the unchanged settings for the basic console address.

10.6 Basic address for Home Automations functions

The basic address is set to control multiple Home Automation modules on the SC9000. The standard basic address is A1. The A in this address is called the HouseCode. The HouseCode of the console, the remote controls and the Home Automation modules all have to have the same letter. The 1 in the basic address is called the UnitCode. If your neighbours also have a Marmitek security system, it may be necessary to change the basic addresses and the addresses of your Marmitek X-10 modules.

If you change the HouseCode of the console, the addresses for the Home Automation functions also change. Example: You change the HouseCode from A into C.

SAFEGUARD / TOTALGUARD

31

Image 31
Contents Safeguardsafeguard TOTALGUARDTOTALGUARDtm Basic Options Introduction Safety warningsExtra Options Introduction Safety warnings Your Marmitek surveillance system Contents of your setImportant properties Marmitek TotalGuard-systeemSecurity console Signal rangeInstalling the console Mounting the console onto the wall Setting the console on a flat surfaceMounting the security console MenusP T I O N S Choosing your languageMenu in English Registering the Key Chain Remote Control Installing remote controlsKey Chain Remote Control KR21 Using the Key Chain Remote ControlRegistering the Comfort Remote Control Using the Comfort Remote ControlUsing the Door/Window Sensor Installing the sensorsDoor/Window Sensor DS90 Registering a Door/Window Sensor Motion Detector MS90Test mode Testing the location of your motion detector Using the Motion DetectorRegistering a Motion Detector Setting the clock Setting up the security console SC9000Smoke Detector SD10 / SD90 Recording your own message Storing phone numbersPhone Setting the alarm Using the security systemSwitching on the ARM Home function Panic alarmSiren What happens when the alarm goes off?Error messages Disarming the systemIntroduction Prevention and comfort ‘Home Automation’Comfort functions of the KR21 Key Chain Remote Control Alarm functions of the Lamp/Dimmer ModulesAddressing your modules Comfort functions of the security console Comfort functions of the SH624 Comfort Remote ControlSetting the timer Switch 4 in SettingRandom Clearing the timer settingsDaily Once onlyAdvanced system functions Setting the delaysClearing the memory of your security system Activating the chime Changing the access code PINDisarming the siren for silent alarm Advanced security functionsAdding a wired sensor to the Door/Window Sensor DS90 Using wired inputsDeregistering a Door/Window Sensor Emergency sensors always modeChecking the status of the security system Installing an extra siren Marmitek PH7208, art. noAdvanced Home Automation functions Deregistering a Motion DetectorBasic address for Home Automations functions Using an external universal sirenC1 and C2 Calling the security system Telephone functionsActivating the call-in function Console 4xAA batteries Operating the alarm functions via an outside phoneChanging the batteries Operate lights and equipment via an outside phoneMotion Detector MS90 2x AA batteries Key Chain Remote Control KR21 2x CR2016 batteriesComfort Remote Control SH624 4x AAA batteries Door/Window Sensor DS90 2x AAA batteriesFrequently asked questions Tabel Sensors Standard for TotalGuard, optional for SafeGuard Technical DataMarmitek BV PO. BOX 4257 5604 EG Eindhoven Netherlands Declaration of Conformity

TOTALGUARD specifications

Marmitek TOTALGUARD is a comprehensive security solution designed to enhance the safety and security of homes and businesses. This advanced system integrates cutting-edge technologies to provide a robust protective measure against unauthorized access, theft, and other security threats.

One of the standout features of TOTALGUARD is its user-friendly interface. The system is designed for simplicity, allowing users to easily control and monitor their security settings via a dedicated mobile app. This app offers real-time notifications and allows users to receive alerts about any suspicious activities, ensuring immediate response to potential threats.

TOTALGUARD employs a range of high-tech sensors and cameras that deliver high-definition video surveillance around the clock. Its motion detection capabilities are finely tuned, allowing the system to differentiate between normal activity and potential intrusions. This minimizes false alarms, giving users peace of mind that their property is protected without the constant interruptions of unnecessary alerts.

The system is also equipped with smart home integration features, making it compatible with popular smart home devices. This connectivity means that homeowners can integrate their security system with other elements of their smart home – such as lighting and climate control – to create a comprehensive safety net. When an alert is triggered, smart lights can turn on to deter intruders, and connected devices can alert users to any unusual activity in their vicinity.

One of the key characteristics of the TOTALGUARD system is its scalability. Whether you live in a small apartment or manage a large commercial facility, the system can be expanded by adding more sensors, cameras, and modules as needed. This adaptability makes it an ideal choice for a variety of users and settings.

In addition, TOTALGUARD features advanced encryption protocols that ensure the security of data transmission between devices, safeguarding sensitive information from cyber threats. This level of security is crucial in today's digital landscape where security breaches can occur remotely.

Lastly, the Marmitek TOTALGUARD system is designed to be easily installed without the need for professional assistance, making it accessible to a wide range of consumers. With its combination of advanced technology, ease of use, and flexibility, TOTALGUARD represents a formidable solution for anyone looking to enhance their security measures in an increasingly uncertain world.