Marmitek TOTALGUARD Comfort functions of the SH624 Comfort Remote Control, Setting the timer

Page 24

BASIC OPTIONS

7.6 Comfort functions of the SH624 Comfort Remote Control

☺Switch and dim lights remotely. Switch the garden lamps on from your bedroom when you hear suspicious noises.

Switch (4) SEC setting:

The bottom five buttons (1) are used to switch the Marmitek X-10 modules with corresponding addresses (UnitCodes 1-5).

Use the green button (3) to dim lamps connected to a lamp/dimmer module.

ALL LIGHTS ON (2): To switch on all lamp/dimmer modules with one press of a button.

ALL LIGHTS OFF (2): To switch off all the modules (both lamp and device modules) with one press of a button.

SWITCH (4) IN SETTING 1:

1 ..... 8: To switch Marmitek X-10 Home Automation modules with corresponding

addresses (UnitCodes 1-8).

2

5

2

1

3

4

SWITCH (4) IN SETTING 2:

9 .....16: To switch Marmitek X-10 Home Automation modules with corresponding addresses (UnitCodes 9-16).

Leave the HouseCode switch (5) set to A for now (see 10.6 for more information).

7.7 Comfort functions of the security console

You can also control the modules using the console. If you do not see a menu, the console is in HOME CONTROL mode. The display will read HOME CONTROL. To control a module with UnitCode 1, press 1 followed by ON or OFF.

If you want to control module 12, press 1, then 2, followed by ON or OFF.

7.8 Setting the timer

You can turn on the lighting at pre-programmed times, so that it appears as if you are at home.

1. To access the menu, press the menu or menu button. The display will now read ‘ENTER PIN’.

2.Enter your 4-digit PIN code (factory setting 0000. See 8.3 for changing the PIN code). For every digit entered, a * will appear on the display.

3.When the PIN code has been entered correctly, the word ‘INSTALL’ will show up on the display.

4.

Use the menu buttons

/

to go to menu item 9. SET TIMER. Press OK to select this menu item. You can also go to this menu

 

item directly by pressing a 9 on the number pad.

5.

The display will read ‘NEW TIMER’. Press OK.

☺ Use the menu buttons

/

to check timers you previously set. The top menu item is always called NEW TIMER,

 

unless all 12 timers have been set.

6.The display will read UNIT NUMBER. Use the number pad to enter the UNITCODE of the desired module (1-16). Example: If you

enter 12, the display will read TIMER 12 ON. The lowest line will read " : ".

7.Enter the time you want to lights to be switched on (24 hour notation). If you make a mistake, press CLEAR. Press ON when you only want to enter the time the lights need to be switched on.

8.Press OK. The display now reads TIMER 12 OFF. The lowest line will read " : ".

24

MARMITEK

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Safeguardsafeguard TOTALGUARDTOTALGUARDtm Introduction Safety warnings Basic OptionsExtra Options Introduction Safety warnings Contents of your set Your Marmitek surveillance systemMarmitek TotalGuard-systeem Important propertiesSignal range Security consoleInstalling the console Setting the console on a flat surface Mounting the security consoleMenus Mounting the console onto the wallChoosing your language P T I O N SMenu in English Installing remote controls Key Chain Remote Control KR21Using the Key Chain Remote Control Registering the Key Chain Remote ControlUsing the Comfort Remote Control Registering the Comfort Remote ControlInstalling the sensors Using the Door/Window SensorDoor/Window Sensor DS90 Motion Detector MS90 Registering a Door/Window SensorUsing the Motion Detector Test mode Testing the location of your motion detectorRegistering a Motion Detector Setting up the security console SC9000 Setting the clockSmoke Detector SD10 / SD90 Storing phone numbers Recording your own messagePhone Using the security system Setting the alarmPanic alarm Switching on the ARM Home functionWhat happens when the alarm goes off? Error messagesDisarming the system SirenPrevention and comfort ‘Home Automation’ IntroductionAlarm functions of the Lamp/Dimmer Modules Comfort functions of the KR21 Key Chain Remote ControlAddressing your modules Comfort functions of the SH624 Comfort Remote Control Setting the timerSwitch 4 in Setting Comfort functions of the security consoleClearing the timer settings DailyOnce only RandomSetting the delays Advanced system functionsClearing the memory of your security system Changing the access code PIN Disarming the siren for silent alarmAdvanced security functions Activating the chimeUsing wired inputs Adding a wired sensor to the Door/Window Sensor DS90Emergency sensors always mode Deregistering a Door/Window SensorInstalling an extra siren Marmitek PH7208, art. no Advanced Home Automation functionsDeregistering a Motion Detector Checking the status of the security systemUsing an external universal siren Basic address for Home Automations functionsC1 and C2 Telephone functions Calling the security systemActivating the call-in function Operating the alarm functions via an outside phone Changing the batteriesOperate lights and equipment via an outside phone Console 4xAA batteriesKey Chain Remote Control KR21 2x CR2016 batteries Comfort Remote Control SH624 4x AAA batteriesDoor/Window Sensor DS90 2x AAA batteries Motion Detector MS90 2x AA batteriesFrequently asked questions Tabel Sensors Technical Data Standard for TotalGuard, optional for SafeGuardDeclaration of Conformity Marmitek BV PO. BOX 4257 5604 EG Eindhoven Netherlands

TOTALGUARD specifications

Marmitek TOTALGUARD is a comprehensive security solution designed to enhance the safety and security of homes and businesses. This advanced system integrates cutting-edge technologies to provide a robust protective measure against unauthorized access, theft, and other security threats.

One of the standout features of TOTALGUARD is its user-friendly interface. The system is designed for simplicity, allowing users to easily control and monitor their security settings via a dedicated mobile app. This app offers real-time notifications and allows users to receive alerts about any suspicious activities, ensuring immediate response to potential threats.

TOTALGUARD employs a range of high-tech sensors and cameras that deliver high-definition video surveillance around the clock. Its motion detection capabilities are finely tuned, allowing the system to differentiate between normal activity and potential intrusions. This minimizes false alarms, giving users peace of mind that their property is protected without the constant interruptions of unnecessary alerts.

The system is also equipped with smart home integration features, making it compatible with popular smart home devices. This connectivity means that homeowners can integrate their security system with other elements of their smart home – such as lighting and climate control – to create a comprehensive safety net. When an alert is triggered, smart lights can turn on to deter intruders, and connected devices can alert users to any unusual activity in their vicinity.

One of the key characteristics of the TOTALGUARD system is its scalability. Whether you live in a small apartment or manage a large commercial facility, the system can be expanded by adding more sensors, cameras, and modules as needed. This adaptability makes it an ideal choice for a variety of users and settings.

In addition, TOTALGUARD features advanced encryption protocols that ensure the security of data transmission between devices, safeguarding sensitive information from cyber threats. This level of security is crucial in today's digital landscape where security breaches can occur remotely.

Lastly, the Marmitek TOTALGUARD system is designed to be easily installed without the need for professional assistance, making it accessible to a wide range of consumers. With its combination of advanced technology, ease of use, and flexibility, TOTALGUARD represents a formidable solution for anyone looking to enhance their security measures in an increasingly uncertain world.
Top Page Image Contents