Kompernass KH 1410 Items supplied, Technical data, Appliance description, Unpacking and assembly

Items supplied

Cyclone Vacuum cleaner

Suction hose

Telescopic tube

Floor tool

Accessory holder

Crevice tool

Upholstery brush

Operating instructions

Order card

Technical data

Power supply:	220–240 V~/50 Hz
Power rating:	min: 1400 W
	max: 1800 W
Protection class:	II

Appliance description

1Dust collector carrying grip

2 Unlock button for housing lid

3 Exhaust filter cover

4 Storage bracket for floor tool

5 On/Off switch

6 Vacuum cleaner carrying grip

7 Suction power regulator

8 Foot button for power cable rewind

9 Power cable with power plug

0 Storage bracket for floor tool q Housing cover

w Selector switch for carpet/hard surface e Floor tool

r Storage hook t Dust collector

z Suction pipe connector

u Height adjuster for telescope tube i Storage hook

oTelescope tube p Accessory bracket a Suction hose

s Secondary air regulator d Hand grip

f Crevice tool

g Upholstery brush (rotatable through 360°)

Unpacking and assembly

Unpacking

•Unpack the appliance and the accessories and check that all listed items are available.

Assembly

Attention!

Assemble the appliance with the plug 9 disconnec- ted from the power supply. The appliance could be inadvertantly switched on.

1.Insert the suction pipe connector z into the socket on the vacuum cleaner until the locking device engages.

2.Insert the hand grip d into the upper end of the telescope tube o until it is firmly seated.

3.Place the desired tool (floor tool e, crevice tool f or upholstery brush g, see chapter „Changing tools“) on the lower end of the telescope tube o.

4.Adjust the telescope tube o to the desired length: Press the height adjustor u down. Pull the telescope tube o apart on the hand grip d. When you have the desired length release the height adjuster u. Pull the telesopic tube o a little further until it audibly engages.

The Cyclone Vacuum Cleaner is now ready for use.

- 3 -