LOREX Technology WA-410 Arm or Disarm Via the Telephone Line for Tone Mode, Auto-dialer priority

z

z

z

SP DIAL		+	4	, the autodial order is: Preset 4 → Preset 1 → Preset 2	→Preset
3	(Burglary condition)
		+	5	, the autodial order is: Preset 5 → Preset 1 → Preset 2	→Preset
SP DIAL
3	(Fire condition)
		+	6	, the autodial order is: Preset 6 → Preset 1 → Preset 2	→Preset
SP DIAL
3	(Medical help condition)

Arm or Disarm Via the Telephone Line (for Tone Mode)

This function allows you to dial your home telephone from outside and remotely control/change the arm/disarm status of your security system. When you hear a long ‘Beep’ sound after 10 rings on the phone, enter the ‘Master code’135246 (default). If the password is correct, the system will respond with a long Beep sound (if the password is less than 6 digits, you will need to enter the # button to finish the password entry).

One ‘Beep’ sound indicates that the system is in the ‘Armed-Away’ mode, Two ‘Beep’ sound indicates it’s in the ‘Armed-Home’ mode

Three ‘Beep’ sound indicates that the system is ‘Disarmed’.

You can now key-in (1, 2 or 3) to change the status. The Main console will respond to the relative message as listed below.

Response message as listed below:

zPressing 1 indicates that the system is ‘Armed-Away’. You will hear one ‘Beep’ sound through the phone.

zPressing 2 indicates that the system is ‘Armed-Home’. You will hear two ‘Beep’ sounds through the phone .

zPressing 3 indicates that the system is ‘Disarmed’. You will hear three ‘Beep’ sounds through the phone.

If the system has been programmed in the ‘Armed-Away’ or ‘Armed-Home’ mode, you need to ‘Disarm’ the system with the first call and a second call to change the Arm status. If you do not disarm first, and press ‘1’ or ’2’ directly, the system will emit ‘bi-bi-bi’ and reject your setting. You must press ‘3’ to disarm first.

Note: this function will work on touch- tone service lines only

Auto-dialer priority

This system stores up to six (6) telephone numbers in the Main Console. If it is triggered and an alarm is activated, the auto-dialer will call the 4 preset telephone numbers that you programmed (listed below) and play your pre-recorded message.

If system is triggered:

Burglary help - It will automatically dial Preset 4 → Preset 1 → Preset 2 → Preset 3 phone

numbers for 3 cycles (4, 1, 2, 3). When the telephone is answered, it will playback the message 2 times

Fire help - It will automatically dial Preset 5 → Preset 1 → Preset 2 → Preset 3, phone numbers for 3 cycles (5, 1, 2, 3). When the telephone

14