LOREX Technology WA-410 LCD MSG Message indicating on LCD, Hour Mode, Away and H-HOME modes

Page 16

is answered, it will playback the message 2 times

Medical help - It will automatically dial Preset 6 Preset 1 Preset 2 Preset3,

phone numbers for 3 cycles (6, 1, 2, 3). When the telephone is answered, it will playback the message 2 times

LCD “MSG” : Message indicating on LCD

This system will leave a warning message on the LCD panel when the sensors are opened, triggered or in a low battery condition. It also emits 3 short ‘Beeps’ every 10 Sec. to remind you of this. The first 5 messages can be displayed on the LCD. If you want to check or delete the MSG, the system will need to be in the disarm mode. The LCD display is shown below.

00 HOME SECURITY Disarmed MSG

Press the ENTER button to read the message. Press the ENTER button again to read the next message…etc.

63 DOOR SENSOR

01 Open

Press the CANCEL button to delete all ‘MSG’s’. The LCD display is shown below.

MESSAGE DELETED

24 Hour & Home-Away Functions

24 Hour Mode

The Lorex® security system can work for you 24 hours a day,7 days a week. The system features a 24 hour status capability which is important for use with some accessory sensors. The sensors that belong to the 24 hour mode include the Smoke Detector,

Gas Detector and Remote Control Handset (PANIC button)

A-AWAY and H-HOME modes:

When the system is armed in the HOME mode, the Main Console will exclude all PIR Detectors, so the user can move freely within the house without triggering the PIR Motion Detector.

When the system is armed in the AWAY mode, all sensors programmed are active and are ready to trigger the alarm

15

Image 16
Contents Wireless Home Security System Table of Contents Important Safety Instructions Expandability IntroductionPersonalized Planning for Installation Setting Alarm ZonesPowering the Main Console Choosing LocationConnecting the Telephone Line Setting the AntennaAbout Passwords Mounting the Main ConsoleOperation Main Console LCD Panel IllustrationAntenna Used for wireless reception DC Power Jack DC supply inputSpeaker Line JackSystem Option menu Press 0 to start setting Setting Message Rec Sel Msg 1 25 Sec Setting Message Play Sel Msg 1 25 SecSetting Dialer Mode Setting Change Code InstallSequence Programming Menu Replacement Menu Clear MenuFunction for Master Menu Factory Default Password Check Function Speed Dial FunctionArm or Disarm Via the Telephone Line for Tone Mode Auto-dialer priorityResponse message as listed below If system is triggeredHour Mode Gas Detector and Remote Control Handset Panic buttonLCD MSG Message indicating on LCD Away and H-HOME modesRemote Control Handset Zone Address SettingTo Arm or Disarm with the Remote Control Handset Remote Sensor Armed HomePIR Motion Detector Main FeaturesPanic Replace the Battery Installing the PIR Motion SensorLow battery Do not install any PIR motion sensor in the following areasTo install the PIR Motion Sensor, please follow these steps Door/Window DetectorChange the Battery Door/Window Detector for DC 12V batteryInstalling the Door/Window Detector Installing for DC 12V DetectorLCD display on the Main Console for Door/Window Detector TamperMini Siren Summary of Program Main Console Summary of Sensors and Zone Settings DescriptionsSpecifications Learning Place Zone LabelSpecifications Installation TemplateItems Page It’s all on the web