LOREX Technology WA-410 instruction manual Operation Main Console, LCD Panel Illustration

Operation – Main Console

The Main Console is the heart of the security system. It monitors the sensors and responds according to how it is programmed, whenever a sensor is activated. The illustration shown for the Main Console may look complex at first, however, most procedures are straightforward and easy. Please review the illustration below, which labels all the parts of the Main Console.

LCD Panel Illustration

1 2 3

4 5 6

7 8 9

0 #

MICROPROCESSOR CONTROL KEYPAD

LEGEND

1 . NUMERIC AND #, BUTTONS		9 . AWAY BUTTON		17	. OUTPUT TERMINAL JACKS
2 . BURGLARY BUTTON		10	. HOME BUTTON	18	. TELEPHONE JACKS
3	. FIRE BUTTON	11	. MIC	19	. TEL LINE JACK
4 . MEDICAL EMERGENCY BUTTON		12	. POWER LED INDICATOR	20 . DC POWER JACK
5	. SP DIAL BUTTON	13	. ARMED LED INDICATOR
6	. CHECK BUTTON	14	. LCD PANEL
7	. CANCEL BUTTON	15 . SPEAKER
8	. ENTER BUTTON	16 . ANTENNA

1.Numeric keys and : For telephone setting include the pound and star keys.

#keys

2.Burglary Button : Press the SP DIAL & Burglary Buttons together

3.	Fire Button	: Press the SP DIAL & Fire Buttons together
4.	Medical	: Press the SP DIAL & Fire Buttons together
	Emergency

5.SP DIAL button : Press the SP DIAL button together with 4, 5 or 6 to activate one of the 3-emergency dialing numbers

6.	Check	: Press the CHECK button to review sensor settings and to check
		recorded message.
7.	Cancel	: Press the CANCEL button to go back to the previous menu or to
		delete the Message
8.	Enter	: Press ENTER to confirm program entry.
9. Away		: Key-in the “ Master ” code, then press the AWAY button to arm
		the system in the away mode
10. Home		: Key-in the “ Master ” code then press the HOME button to arm the
		system in the home mode
11. Mic		sed to record messages, and for two way communication voice
		input.

12.Power LED : Indicates whether the AC Adaptor power is on or off.

6