•Press the PANIC button, to activate the “PANIC” function. The activation of the “PANIC” function will immediately trigger the alarm and auto dialer.
63 REMOTE SENSOR
01 Panic
PIR Motion Detector
The PIR Motion Detector is designed to detect the movement of objects in a room or hallway. The effective range of the motion sensor is 30 feet long, with an 84degree horizontal angle. Before using this sensor, please program this sensor into the main console via the sequence programming menu. Even if the PIR Motion Detector is triggered and the main console is armed in the HOME mode, the main console will neglect the PIR signal. You can move freely within your house without triggering the alarm.
Main Features :
1.LED : When the PIR has detected any human movement, the red LED will blink for One sec. This means its transmitting out a signal to the Main Console. When the battery power becomes low, it will send out a low battery message and the
red LED will blink for one second. If the Main Console receives this
message,
it will leave a message on the display.
2.C/OFF/W SWITCH :
(i)When the switch is set to “C – Continue” position, the PIR sensor will continually detect movement at a 3 to 5 second interval
(ii)When the switch is set to the “ OFF” position, the power is turned OFF and the PIR sensor will not work.
(iii)When the switch is set to the “W- Wait” position, the PIR sensor will detect movement at a 2 to 3 minute interval. This is to conserve battery power.
3.DETECTING SENSITIVITY : (1 , 2 , 4) select the sensor for high, medium or low sensitivity.
17