LOREX Technology WA-410 Planning for Installation, Choosing Location, Setting Alarm Zones

Page 5

Planning for Installation

The security system is designed to be as flexible as possible in order to meet your present needs, and also to adapt as your needs change. For the reason, we recommend that you read and consider the following information and plan your system before installing these devices.

Choosing Location

It is important to try and place the Main Console in an area central to the alarm sensors. This way, all of the sensors can transmit signals with maximum efficiency. The Main Console must be placed near a power outlet and telephone jack.

Setting Alarm Zones

Before installation, you should have the sensors programmed on the Main Console via the systems learning mode on the Main Console. This system allows you to install a maximum of 63 wireless sensors.

Installing the Back-up Battery-Optional Accessory(Not included)

1.Remove the battery cover at the back of the Main Console

2.Locate the connector plug and connect the rechargeable back-up battery (BP 410) to this connector

3.Re-install the battery cover

Powering the Main Console

1.Attach the end of the adapter into the connector provided at the top of the console.

2.Plug the AC adaptor into the power outlet.

3.When the power is installed on the main console you will see the LCD (shown below)

Welcome

00 HOME SECURITY Disarmed

4

Image 5

Contents Wireless Home Security System Table of Contents Important Safety Instructions Personalized IntroductionExpandability Setting Alarm Zones Planning for InstallationPowering the Main Console Choosing LocationSetting the Antenna Connecting the Telephone LineAbout Passwords Mounting the Main ConsoleLCD Panel Illustration Operation Main ConsoleDC Power Jack DC supply input Antenna Used for wireless receptionSpeaker Line JackSystem Option menu Press 0 to start setting Setting Message Play Sel Msg 1 25 Sec Setting Message Rec Sel Msg 1 25 SecSetting Dialer Mode Setting Change Code InstallSequence Programming Menu Clear Menu Replacement MenuFunction for Master Menu Factory Default Password Speed Dial Function Check FunctionAuto-dialer priority Arm or Disarm Via the Telephone Line for Tone ModeResponse message as listed below If system is triggeredGas Detector and Remote Control Handset Panic button Hour ModeLCD MSG Message indicating on LCD Away and H-HOME modesZone Address Setting Remote Control HandsetTo Arm or Disarm with the Remote Control Handset Remote Sensor Armed HomePanic Main FeaturesPIR Motion Detector Installing the PIR Motion Sensor Replace the BatteryLow battery Do not install any PIR motion sensor in the following areasDoor/Window Detector To install the PIR Motion Sensor, please follow these stepsDoor/Window Detector for DC 12V battery Change the BatteryInstalling for DC 12V Detector Installing the Door/Window DetectorLCD display on the Main Console for Door/Window Detector TamperMini Siren Summary of Program Main Console Descriptions Summary of Sensors and Zone SettingsLearning Place Zone Label SpecificationsItems Installation TemplateSpecifications Page It’s all on the web