Vulcan-Hart VIR1F, VIR1CF, VIR1BF, VIR1SF manual Leveling and Connecting Manifolds ALL Models

Page 7

LEVELING AND CONNECTING MANIFOLDS - ALL MODELS

1.Place the broiler in its exact position or battery lineup.

2.Using a carpenter level, level the broiler from front to rear and from side to side. Unless the broilers are level, they will not give proper cooking results, and equipment being batteried will not draw up tight.

If you are installing a new battery appliance to an existing field appliance, the union on the existing field appliance must be checked against the union being used on the new range. The union manufacturer’s name around the face surface of the union nut must match.

– 7 –

Image 7

Contents Series HDR Broilers Important for Your Safety Stop Bolts Models Rating Plate Location Unpacking ALL Broiler ModelsModel LocationCombustible NON-COMBUSTIBLE Broilers Mounted on Casters Installation Codes and Standards ALL Broiler ModelsLeveling and Connecting Manifolds ALL Models Page GAS Connections Testing the GAS Supply SystemFlue Connections Lighting Instructions Broiler Sections Electrical ConnectionsControls OperationBefore First USE Main Gas ValveCooking Using the BroilerExterior CleaningService and Parts Information Checks to be Made Before Calling the ServicerLubrication Page Grilloirs HDR DE LA Série Mesures DE Sécurité Importantes Boulons D’ARRÊT Déballage Tous LES Modèles DE Grilloirs Modèles Emplacement DE LA Plaque SignalétiqueConstruction Modèle Combustible NON-COMBUSTIBLE EmplacementGrilloirs SUR Roulettes Codes D’INSTALLATION ET Normes Tous LES Modèles DE GrilloirsPage Page Essais DE LA Canalisation DE GAZ Branchement DU GAZRaccordement DU Conduit D’ÉVACUATION Directives D’ALLUMAGE Grilloirs Raccordement ÉlectriqueFonctionnement CommandesAvant UNE Première Utilisation Robinet de commande du grilloirUtilisation DU Grilloir CuissonRevêtement extérieur NettoyageLubrification Service DE L’ENTRETIEN ET Pièces DE RechangeAvant D’APPELER LE TECHNICIEN, Vérifier LES Points Suivants