Therma-Tru Fiber-Classic, Smooth-Star manual Double Unit Assembly & Installation

Page 1

PATIODOORSYSTEMS

Therma-Tru®

Fiber-Classic®

and

Smooth-Star®

Sliding Patio

Door System

Double Unit

Assembly & Installation

Read all instructions before starting.

The applicable standards for these products are governed by

the International Residential Code.

Copies of performance ratings and testing are available on our website

www.thermatru.com and our product manual.

Image 1

Contents Double Unit Assembly & Installation Screen sold separately Active Panel Inactive Panel Screw Chart Install Sill CAP Base If APPLICABLE, Install TOP-HUNG Screen TrackLAY Frame Components Onto Work Area Attach Head to Jambs Attach Sill to JambsApply Corner Pads to Sealing FIN Drip CAP InstallationFrame Installation SET Unit Into Rough Opening Apply Silicone Sealant to Sill and FinsPlumb Side Jambs Level SillApply Sealant to Inactive Door Riser Secure Frame in Rough OpeningInstall Anchor Blocks Install Stationary PanelAdjust Rollers Install Active PanelAttach Inactive Interlock Install Active InterlockInsert Panel Bumper Handle InstallationAttach Strike Plate Prep Door for Foot Bolt Install Sill CAP TOPAttach Foot Bolt Insert Plugs Install Foot Bolt KeeperAttach Jamb Cover Sliding Screen DoorActive panel edge Dia holes 1 deep Towards Page Finishing Instructions Jamb Extension Information WEATHERPROOF, Finish and MaintainInterior Casing Attachment Sizing Information Door Handing Guide Patiodoorsystems