23
PREP DOOR FOR FOOT BOLT
Tear out template on page 16 to locate and drill holes for foot bolt.
Locate template on interior side of active panel towards inactive panel side. Align line on template with edge of active door panel and tape into place. Drill 1/8" dia. x 1" deep holes at hole locations shown on template. Remove template.
24
ATTACH FOOT BOLT
Align foot bolt to
(3) #8 x 9/16" S.S. Pan Head
Sheet Metal Screws
(1)#8 x 1 ½" S.S. Pan Head Sheet Metal Screw
Locate on bottom right corner of the foot bolt.
25 INSTALL SILL CAP TOP
Place a continuous bead of clear sealant, to locations shown, along entire length of sill cap base.
Install sill cap top by starting at each jamb and working towards the center of the door. Use a rubber mallet to snap into place.
Sill cap top
Sealant
Sill cap base
14