Therma-Tru Smooth-Star, Fiber-Classic manual Install Active Panel, Adjust Rollers

Page 12

16

INSTALL ACTIVE PANEL

From interior side of system, install active panel up into interior channels in head jamb. Push upwards as far as possible and rotate into place until rollers engage sill roller track.

Head Jamb

Interior

Exterior

Interior channels

17

ADJUST ROLLERS

Using a screw driver, turn adjustment screws in rollers left or right until panel is level and glides smoothly across the track.

Close panel to within 1/4" of lock jamb. Use visual margin to assure panel is adjusted straight with frame.

11

Image 12
Contents Double Unit Assembly & Installation Screen sold separately Active Panel Inactive Panel Screw Chart If APPLICABLE, Install TOP-HUNG Screen Track Install Sill CAP BaseLAY Frame Components Onto Work Area Attach Sill to Jambs Attach Head to JambsDrip CAP Installation Apply Corner Pads to Sealing FINFrame Installation Apply Silicone Sealant to Sill and Fins SET Unit Into Rough OpeningLevel Sill Plumb Side JambsSecure Frame in Rough Opening Apply Sealant to Inactive Door RiserInstall Stationary Panel Install Anchor BlocksInstall Active Panel Adjust RollersInstall Active Interlock Attach Inactive InterlockHandle Installation Insert Panel BumperAttach Strike Plate Install Sill CAP TOP Prep Door for Foot BoltAttach Foot Bolt Install Foot Bolt Keeper Insert PlugsAttach Jamb Cover Sliding Screen DoorActive panel edge Dia holes 1 deep Towards Page Finishing Instructions WEATHERPROOF, Finish and Maintain Jamb Extension InformationInterior Casing Attachment Sizing Information Door Handing Guide Patiodoorsystems