Therma-Tru Smooth-Star, Fiber-Classic Drip CAP Installation, Apply Corner Pads to Sealing FIN

Page 6

6

DRIP CAP INSTALLATION

Place drip cap on top of head jamb.

Place head sealing fin on top of drip cap, engaging slot in sealing fin with flange on drip cap.

Staple head sealing fin to each of the anchor blocks in

head jamb using 1/2" staples, nails or screws (not provided).

Head sealing fin

Drip cap

Side jamb

7

APPLY CORNER PADS TO SEALING FIN

Apply corner pads to

Exterior

sealing fins at top corners.

Corner pad

5

Image 6

Contents Double Unit Assembly & Installation Screen sold separately Active Panel Inactive Panel Screw Chart If APPLICABLE, Install TOP-HUNG Screen Track Install Sill CAP BaseLAY Frame Components Onto Work Area Attach Sill to Jambs Attach Head to JambsDrip CAP Installation Apply Corner Pads to Sealing FINFrame Installation Apply Silicone Sealant to Sill and Fins SET Unit Into Rough OpeningLevel Sill Plumb Side JambsSecure Frame in Rough Opening Apply Sealant to Inactive Door RiserInstall Stationary Panel Install Anchor BlocksInstall Active Panel Adjust RollersInstall Active Interlock Attach Inactive InterlockHandle Installation Insert Panel BumperAttach Strike Plate Install Sill CAP TOP Prep Door for Foot BoltAttach Foot Bolt Attach Jamb Cover Install Foot Bolt KeeperInsert Plugs Sliding Screen DoorActive panel edge Dia holes 1 deep Towards Page Finishing Instructions WEATHERPROOF, Finish and Maintain Jamb Extension InformationInterior Casing Attachment Sizing Information Door Handing Guide Patiodoorsystems