Samsung AR12KRFNEWKXMG, AR24KQFNRWKNMG, AR24MQFNRWKNMG Taping the pipes, cables, and drain hose

Page 38

2Drill the hole.

CAUTION

•Be sure to drill only one hole.

•Make sure that the hole slants downwards so that the drain hose slants downwards to drain water well.

Wall

Drain hose

Indoor unit

Step 1.5 Taping the pipes, cables, and drain hose

1Wrap foam insulation on parts without insulation on the ends of the refrigerant pipes, as shown in the figure. This wrapping minimises condensation problem.

Insulation

Refrigerant pipes

2Wind the refrigerant pipes, power cable, communication cable and drain hose with vinyl tape to make a pipe bundle.

	Refrigerant pipes
Installation plate	(assembly pipe)
Installation plate
Vinyl tape
Power and communication cables
(assembly cable)
Drain hose

Installation

English 37

Image 38

Contents Samsung Airconditioner DB68-06042A-02Contents Correct Disposal of This Product This may result in electric shock or fire Safety InformationFailing to do so may result in electric shock or fire For Power Supply This may result in electric shock or burns Do not touch the circuit breakerwith wet handsThis may result in electric shock This may result in children seriously injuring themselvesDo not drink the water from the air conditioner Do not place objects or devices under the indoor unitDo not operate the appliance with wet hands Do not touch the pipes connected with the productFor Cleaning Do not clean the inside of the air conditioner by yourselfIndoor Unit Overview Operation indicatorSingle user indicator DisplayRemote Control Overview Inserting batteriesOperation modes Remote Control OperationControlling temperature Horizontal air flow manual Controlling air flow directionVertical air flow Step cooling function Cool modeCooling Operation Dry mode Dehumidifying OperationHeating Operation Heat modeMode is running Is running The blade looks almost closedFan mode Quick Smart FeaturesAuto mode Fast function Comfort function Select BeepSingle user function Cool mode When the Single user function starts,Energy-Saving Operation Timed on/Timed off function Default operation time for the good’sleep function Good’sleep functionDo not clean the display by using alkaline detergent Cleaning at a GlanceRunning Auto clean Cleaning the filter Troubleshooting Does not work Check whether the drains are clean. Clean them regularlyTo pass the error code to the service centre Electric wavesTechnical Specifications 27˚C 20000 Btu/h AR18MQFNEWK/MG AR24MRFNEWK/MG AR24MQFNRWK/MG General information Safety Information on InstallationInstallation of the unit Power supply line, fuse, or circuit breaker Install the unit in a place where water can drain smoothlyMinimum clearances for the outdoor unit Choosing the installation locationPreparation Unit mm Packing and Unpacking5cases Indoor unitOptional accessories Checking and preparing accessories and tools AccessoriesAccessories in the indoor unit package Drilling a hole through the wall ToolsTaping the pipes, cables, and drain hose Disassembling the cover panel Indoor Unit InstallationDisassembling the installation PlateConnecting the cables assembly cable Circular terminalPrepare the following tools Optional Extending the power cableCompression dimension should be Apply heat to the contraction tube to contract itInstall the drain hose Installing and connecting the drain hosePressing socket Incomplete wire Optional Extending the drain hoseOptional Changing the direction of the drain hose Shortening or extending the refrigerant pipes assembly pipe Depth aWhen fixing the indoor unit on a window frame 10 Fixing the installation plateWhen fixing the indoor unit on a wall Fix the installation plate without inclining to one side 11 Fixing the indoor unit to the installation plateWhen fixing the indoor unit on a gypsum board 12 Assembling the cover panelFixing the outdoor unit in place Outdoor Unit InstallationConnecting the cables and the refrigerant pipes Optional Fixing the outdoor unit to a wall with a rackCooling capacity and malfunction. Use a vacuum pump Leave the system in the standby modeEvacuating the air Adding refrigerant SiphonRunning the Smart Install mode Performing the gas leak testsBlocking error Open Error indicatorError Appears when anPerforming final check and trial operation Check the following Strength of the installation siteTurn on th air conditioner and select Fast Cool mode Pumping down refrigerantEnglish English English